how do u connect a computer to a router??

Question

please explain in detail

Answer 1

If you have cable:

Use the CD from the router and load it on the main computer. Some have instructions, if they don't, do this:

1) Put the cable into the cable modem from the outside source (as it should already be).

2) Put the cable that was from the modem to your main computer into the router's plug which should be marked from modem, or something to that effect.

3) Take another cable and stick it in one of the holes in the back of the router and connect it to the cable slot where it was from the modem prior, but this time it will be connected from the router instead to the computer.

4) Restart the machine.

Answer 2

.
You will need to purchase an ethernet cable
to connect the router to the modem;
and for each computer you want to physically connect.

The first cable can be short.
For secondary computers the ethernet cable should be more than sufficient to run from the router, around the wall(s) to the next computer;
(unless it is a wireless router where cables are not needed).

Check the back of each computer to see if the computer already has a NIC port installed.

If you do not, you'll need to purchase a NIC card.You don't need an expensive one. Look on Ebay.

To connect:
1. Your incoming ISP connection should run from the wall to your modem.
2. The modem wires plug into the router in their respective places...you
will determine that by the plug-ins
3. The ethernet cable runs from the router to your 1st computer
4. Additional ethernet cables will run from router ports to other computers.

Then run your Network Set Up Wizard.
You'll need a floppy or other to complete the set up for additional computers.
Remember to make at workgroup name for all computers exactly the same.

Last, for file sharing, map the drives for all computers. Each computer will have a different mapped drive letter.

Don't forget to enable file sharing.
Copy the folders you want to share from each computer
into the mapped drive.

For really great instructions that will help you create your Network file sharing
go to your Explore HELP files
START > RIGHT click Explore
On the tool bar above click HELP
then click INDEX
and type in Networking

Happy2Help :)

Answer 3

very carefully lol okay....

How To Set Up a Network Router
From Bradley Mitchell,
Your Guide to Wireless / Networking.
FREE Newsletter. Sign Up Now!
This guide explains how to set up a router for home computer networks. The exact names of configuration settings on a network router vary depending on the model and whether it is wired or wireless. However, this general procedure will guide you through the process for the common kinds of home network equipment.
Difficulty: Average
Time Required: 1 hour
Here's How:
Choose a convenient location to begin installing your router such as an open floor space or table. This does not need to be the permanent location of the device. Particularly for wireless routers, you may find it necessary to re-position the unit after installing it as the cables / signals may not reach all areas needed. At the beginning, its better to choose a location where it's easiest to work with the router and worry about final placement later.


Plug in the router's electrical power source, then turn on the router.


(Optional) Connect your Internet modem to the router. Most network modems connect via an Ethernet cable but USB connections are becoming increasingly common. The cable plugs into the router jack named "WAN" or "uplink" or "Internet." After connecting the cable, be sure to power cycle (turn off and turn back on) the modem to ensure the router recognizes it.


Connect one computer to the router. Even if the router is a wireless model, connect this first computer to the router via a network cable. Using a cable during router installation ensures the maximum reliability of the equipment. Once a wireless router installation is complete, the computer can be changed over to a wireless connection if desired.


Open the router's administration tool. From the computer connected to the router, first open your Web browser. Then enter the router's address for network administration in the Web address field and hit return to reach the router's home page.

Many routers are reached by either the Web address "http://192.168.1.1" or "http://192.168.0.1" Consult your router's documentation to determine the exact address for your model. Note that you do not need a working Internet connection for this step.


Log in to the router. The router's home page will ask you for a username and password. Both are provided in the router's documentation. You should change the router's password for security reasons, but do this after the installation is complete to avoid unnecessary complications during the basic setup.


If you want your router to connect to the Internet, you must enter Internet connection information into that section of the router's configuration (exact location varies). If using DSL Internet, you may need to enter the PPPoE username and password. Likewise, if you have been issued a static IP address by your provider (you would need to have requested it), the static IP fields (including network mask and gateway) given to you by the provider must also must be set in the router.


If you were using a primary computer or an older network router to connect to the Internet, your provider may require you to update the MAC address of the router with the MAC address of the device you were using previously. Read How to Change a MAC Address for a detailed description of this process.


If this is a wireless router, change the network name (often called SSID)[/link]. While the router comes to you with a network name set at the factory, you will never want to use this name on your network.


Verify the network connection is working between your one computer and the router. To do this, you must confirmed that the computer has received IP address information from the router. See How to Find IP Addresses for a description of this process.


(If applicable) Verify your one computer can connect to the Internet properly. Open your Web browser and visit a few Internet sites such as http://compnetworking.about.com/


Finally, connect additional computers to the router as needed. If connecting wirelessly, ensure the network name (SSID) of each is computer matches that of the router.
Tips:
When connecting devices with network cables, be sure each end of the cable connects tightly. Loose cables are one of the most common sources of network setup problems.
What You Need:
A network router (wireless or wired)
Network adapters installed on all devices to be connected to the router
A working Internet modem (optional)
A Web browser installed at least one computer in the network

Answer 4

First, You go 2 the bottom bar and find where it says what your internet connection is. Right-Click it. Click View Available Wireless Networks.On left side of screen click, Set up a wireless network for a home or small office. Then do what it tells you.

Answer 5

use a ethernet cable and connect to the back of your computer to a router port.

Answer 6

look at the back u should be able to use ethernet/usb cables