Take 1 cup washing soda crystals (around 50p a packet from the supermarket laundry and detergent shelves) put in the soap drawer and work through the hottest water cycle. When this cycle is finished take a pint of white vinegar pour into drum and repeat hot wash cycle. Gets rid of most soap and fabric softener build up. Repeat every month and you shouldn't have any further problems Good luck
2006-11-25 12:39:47
·
answer #1
·
answered by bothalezi 3
·
1⤊
0⤋
Have you checked the filter. There is a filter, usually near the bottom, behind a door. You need to clean this out regularly, that can stop the water draining quick enough. Be carefull though as the pipe will be full of water and when you break the seal the water will leak out over the floor so you need a container and some towels to clean it up.
2006-11-24 02:57:57
·
answer #2
·
answered by joe 3
·
0⤊
0⤋
commonly the cleansing soap tray has a plastic tab, in various of circumstances contained in the midsection, both on perfect or each and every from time to time on the bottom. once you press this tab, the tray will be pulled thoroughly out and actual wiped clean in a sink with an previous teeth brush. All cleansing soap trays are designed to be actual bumped off for cleansing. about the rubber rim try to be careful what to apply because it will be damaged with solvents or acidic detergents. I advise that you sparkling it with a tender dish washing liquid and rinse it perfect. contained in the destiny go away the gadget door ajar so as that it would want to dry between washes. in case you could go away it open, it really is even extra extra useful.
2016-11-29 10:25:12
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
Soda and white vinegar on the hotest wash works a treat
2006-11-24 02:54:13
·
answer #4
·
answered by sophie 3
·
0⤊
0⤋
Washing Machines LIve Longer With CALGON!!!! hehe
2006-11-24 03:29:21
·
answer #5
·
answered by Anonymous
·
0⤊
0⤋
were the pipe is connected under the sink take it off and see if the pipe is blocked there this is very common problem with washing machines
2006-11-25 00:40:23
·
answer #6
·
answered by michael w 2
·
0⤊
0⤋
Sounds like you may have a problem with the pump.You'll need to get someone in to check it out.
2006-11-27 07:50:07
·
answer #7
·
answered by nicky dakiamadnat600bugmunchsqig 3
·
0⤊
0⤋
something must be stucking in it so clean it using some washing soda.
2006-11-24 03:31:09
·
answer #8
·
answered by xyz 2
·
0⤊
0⤋
may i help u to clean the machine.we have very good mechanics for such purposes in our factory. i can ask him to go u and check.
2006-11-24 03:16:47
·
answer #9
·
answered by dhunidew 1
·
0⤊
0⤋
sounds like the washer belt might need tightened.
2006-11-25 07:46:29
·
answer #10
·
answered by Anonymous
·
0⤊
0⤋