Whats d problem wen u put on ur computer nd it says NTLDR is missing?

Answer 1

NTLDR is the file that actual loads Windows. You can get that error if there is a non-bootable floppy or CD in one of the drives. If that is not the case, then something has corrupted your Windows installation or the hard drive has gone bad.

You might be able to get an data you have off the drive by placing it into another computer as a second hard drive. But you are probably going to have to format and reinstall Windows to get it going again.

Answer 2

NTLDR is a File that needs to boot up your computer. If its not present or corrupt, you get the NTLDR messing error message.

When the computer starts up, press F8 repeatedly until you get the Operating System choices. Select your Operating System from the list if you have more than one and select the Boot in Safe Mode option. If it boots then, you are well else, there's only one option. To update the Operating System without the need to format the machine completely. Just insert your Operating System CD and you will get the other steps from the CD.

BYE

Answer 3

The computer is telling you something in it's own irritatingly abbreviated way - rather like the way you typed your question.
The cause could be one of the following:
1. Computer is booting from a non-bootable source.
2. Computer hard disk drive is not properly setup in BIOS.
3. Corrupt NTLDR and/or NTDETECT.COM file.
4. Misconfiguration with the boot.ini file.
5. Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32.
6. New hard disk drive being added.
7. Corrupt boot sector / master boot record.
8. Seriously corrupted version of Windows 2000 or Windows XP.
9. Loose or Faulty IDE/EIDE hard disk drive cable.

Best of luck - and try and type questions in english - this is not a text service - you don't need to abbreviate here.

Answer 4

NTLDR is a boot file. Sometimes after several attempts to boot up it does boot up, finally, I would guess, to repeat the same problem repeatedly. Or it has stopped booting up at all. Obviously you need to replace your NTLDR. Here are some links that explain the process:
http://help.lockergnome.com/general/Random-Ntldr-Issue-ftopict34487.html

http://search.yahoo.com/search?fr=ytff1-&p=how%20to%20restore%20corrupted%20ntldr%20file&ei=UTF-8

The second link is a list of links that will help you with your problem.

Answer 5

I had this exact same problem on an old HP. I just went onto another computer copied the ntdetect.com file (which is located in windows or winnt) onto a floppy and I just booted from the floppy and i would be able to boot to windows.

Answer 6

quickest and simplest way to repair it is to boot from your windows cd, then press "r" to enter the recovery console

when recover console has loaded, type fixmbr and answer yes when it asks if u want to write a new boot record, this takes about 2 seconds. once complete type chkdsk

once chkdsk is complete type exit to reboot your computer and you should be able to load into windows again

Answer 7

This heppens when u r booting with a nonbootable floppy or CD.
Remove floppy & CD & boot with Hard disk. Still not booting then the OS is currupted. u need to get the OS recovered or reinstalled.

Answer 8

If your computer is not working properly while you are working on it, it could be a problem with device drivers, hardware or software.
Detailed instructions at http://tinyurl.com/yk5zpr

Answer 9

go to http://www.tinyempire.com/shortnotes/files/ntldr_missing.htm

Answer 10

How to troubleshoot the "NTLDR Is Missing" error message in Windows 2000
View products that this article applies to.
Article ID : 318728
Last Review : October 30, 2006
Revision : 4.1
This article was previously published under Q318728
On This Page

SUMMARY

How to Troubleshoot the "NTLDR Is Missing" Error Message

Verify That the BIOS on the Computer Is Current


Method 1: Use a Boot Disk to Start the Computer

Method 2: Use the Recovery Console

Method 3: Use the Windows 2000 CD-ROM

If Setup Cannot Locate Windows 2000

Additional Resources

Perform a Parallel Installation of Windows 2000

REFERENCES
SUMMARY
This step-by-step article describes methods that you can use to troubleshoot the "NTLDR Is Missing" error message that you may receive when you try to start Microsoft Windows 2000.


Back to the top

How to Troubleshoot the "NTLDR Is Missing" Error Message
When you start your Windows 2000-based computer, you may receive the following error message:
NTLDR is missing
Press any key to restart
This problem may occur if the basic input/output system (BIOS) on your computer is outdated, or if one or more of the following Windows boot files are missing or damaged:
Ntldr
Ntdetect.com
Boot.ini
To resolve this issue, verify that the BIOS on your computer is current, and then use one or more of the following methods, as appropriate to your situation, to repair the Windows 2000 startup environment.

IMPORTANT: Microsoft recommends that you fully back up your data on a regular basis. This is the best defense against data loss, and it must be a part of any disaster recovery plan.


Verify That the BIOS on the Computer Is Current
Make sure that the latest revision for BIOS is installed on the computer. Contact the computer manufacturer to inquire about how to obtain, and then install the latest BIOS update that is available for the computer.

For information about how to configure and how to verify the correct BIOS settings for the computer, see the computer documentation or contact the manufacturer of the computer. For information about how to contact your computer manufacturer, click the appropriate article number in the following list to view the article in the Microsoft Knowledge Base:
65416 (http://support.microsoft.com/kb/65416/) Hardware and software vendor contact information, A-K

60781 (http://support.microsoft.com/kb/60781/) Hardware and software vendor contact information, L-P

60782 (http://support.microsoft.com/kb/60782/) Hardware and software vendor contact information, Q-Z
For more information about how to contact BIOS manufacturers, click the following article numbers to view the articles in the Microsoft Knowledge Base:
243909 (http://support.microsoft.com/kb/243909/) List of BIOS manufacturer Web sites Part 1
243971 (http://support.microsoft.com/kb/243971/) List of BIOS manufacturer Web sites Part 2
To repair the Windows startup environment, use one or more of the following methods, as appropriate to your situation.


Method 1: Use a Boot Disk to Start the Computer
1. Create a Windows 2000 boot disk that contains the following files:
Ntldr
Ntdetect.com
Boot.ini
Ntbootdd.sys
For more information about how to create a boot disk, click the following article numbers to view the articles in the Microsoft Knowledge Base:
301680 (http://support.microsoft.com/kb/301680/) How to create a boot disk for an NTFS or FAT partition in Windows
101668 (http://support.microsoft.com/kb/101668/) How to use a Windows boot disk to prevent boot failure
2. Modify the Boot.ini file to point to the correct hard disk controller and to the correct volume for your Windows installation. For more information about how to create a boot disk, click the following article number to view the article in the Microsoft Knowledge Base:
311578 (http://support.microsoft.com/kb/311578/) How to edit the Boot.ini file in Windows 2000
3. Insert the boot disk into the computer's floppy disk drive, and then restart the computer.
4. Copy the Ntldr file, the Ntdetect.com file, and the Boot.ini file from the boot disk to the system partition of the local hard disk.

Method 2: Use the Recovery Console
1. Use the Windows 2000 Setup disks to restart the computer, or use the Windows 2000 CD-ROM to restart the computer.
2. At the Welcome to Setup screen, press R to repair the Windows 2000 installation.
3. Press C to repair the Windows 2000 installation by using the Recovery Console.
4. Type the number that corresponds to the Windows installation that you want to repair, and then press ENTER. For example, type 1, and then press ENTER. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
229716 (http://support.microsoft.com/kb/229716/) Description of the Windows Recovery Console
5. Type the Administrator password, and then press ENTER.
6. Type map, and then press ENTER. Note the drive letter that is assigned to the CD-ROM drive that contains the Windows 2000 CD-ROM.
7. Type the following commands, pressing ENTER after you type each one, where drive is the drive letter that you typed in step 4 of "Method 2: Use the Recovery Console," of this article:
copy drive:\i386\ntldr c:\

copy drive:\i386\ntdetect.com c:\
If you are prompted to overwrite the file, type y, and then press ENTER.

NOTE: In these commands, there is a space between the ntldr and c:\, and between ntdetect.com and c:\.
8. Type the following command, and then press ENTER:
type c:\Boot.ini
A list similar to the following list appears: [boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT

[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect

If you receive the following message, the Boot.ini file may be missing or damaged:
The system cannot find the file or directory specified.
9. If the Boot.ini file is missing or damaged, create a new one. To do so, follow these steps: a. Use a text editor, such as Notepad or Edit.com, to create a boot loader file similar to the following boot loader file:[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT

[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect

For more information, click the following article number to view the article in the Microsoft Knowledge Base:
102873 (http://support.microsoft.com/kb/102873/) Boot.ini and ARC path naming conventions and usage
301680 (http://support.microsoft.com/kb/301680/) How to create a boot disk for an NTFS or FAT partition in Windows
b. Save the file to a floppy disk as Boot.ini.

NOTE: If you used Notepad to create the file, make sure that the .txt extension is not appended to the Boot.ini file name.
c. Type the following command at the Recovery Console command prompt to copy the Boot.ini file from the floppy disk to the computer:
copy a:\Boot.ini c:\

10. Type exit, and then press ENTER. The computer restarts.

Method 3: Use the Windows 2000 CD-ROM
1. Insert the Windows 2000 CD-ROM into the computer's CD-ROM drive or DVD-ROM drive, and start Windows 2000 Setup.
2. On the Welcome to Setup page, press R.
3. On the Windows 2000 Repair Options page, press R.
4. When you are prompted to select one of the repair options, press M.
5. Press the UP ARROW, press the UP ARROW again, to select Verify Windows 2000 system files, and then press ENTER to clear the selection.
6. Press the DOWN ARROW to select Continue (perform selected tasks), and then press ENTER. The following message appears:
You need an Emergency Repair disk for the Windows 2000
installation you want to repair.
7. Do one of the following, as appropriate to your situation: • If you have an Emergency Repair Disk, follow these steps: a. Press ENTER.
b. Insert the Emergency Repair Disk into the computer's floppy disk drive, and then press ENTER.
c. Follow the instructions to repair the installation, and then restart the computer.
-or-
• If you do not have an Emergency Repair Disk, follow these steps: a. Press L. You receive a message similar to the following:
Setup has found Windows 2000 in the following folder:
drive:\WINNT "Microsoft Windows 2000"
b. Press ENTER.

Setup examines the disks, and then completes the repair process.

For more information about the emergency repair feature, click the following article number to view the article in the Microsoft Knowledge Base:
231777 (http://support.microsoft.com/kb/231777/) How to create an Emergency Repair Disk in Windows 2000



If Setup Cannot Locate Windows 2000
If you do not have a Windows 2000 Emergency Repair Disk, and if Setup cannot locate the Windows 2000 installation, follow these steps: 1. Start Windows 2000 Setup.
2. On the Setup will install Windows 2000 on partition page, select Leave the current file system intact (no changes), and then press ENTER.
3. Press ESC to install Windows 2000 to a new folder.
4. In the Select the folder in which the files should be copied box, type \tempwin, and then press ENTER.

Setup installs a new copy of Windows 2000.
5. Log on to the new copy of Windows 2000.
6. Click Start, and then click Run.
7. In the Open box, type cmd, and then click OK.
8. At the command prompt, type drive:, where drive is the boot drive of the computer, and then press ENTER. For example, type c:, and then press ENTER.
9. Type attrib -h -r -s Boot.ini, and then press ENTER.
10. Type edit Boot.ini, and then press ENTER.

Edit.com opens a Boot.ini file that is similar to the following file:[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\TEMPWIN
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\TEMPWIN="Microsoft Windows 2000 Professional" /fastdetect



11. Replace all instances of TEMPWIN with WINNT. The Boot.ini file that appears is similar to the following file:[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect



12. Press ALT+F, and then press S.
13. Press ALT+F, and then press X.
14. Type attrib +h +r +s Boot.ini, and then press ENTER.
15. Type exit to quit the command prompt.
16. Restart the computer.
17. At the Please select the operating system to start screen, use the ARROW keys to select Microsoft Windows 2000, and then press ENTER.
18. Start Windows Explorer, locate the following folders, and then delete them:
Tempwin
All Users.Tempwin