I have 3 Belkin Wireless G Routers and I wish to set up a wireless bridge between them, I have 2 of them set to Access Points only and set the WPA passwords to the same, and all 3 are on channel 11 but I'm still unable to access each one over the wireless network. Any one have any Ideas?
2006-11-21 10:14:22 · 2 answers · asked by Hitsuji 1 in Computers & Internet ➔ Computer Networking
Make sure that you have typed in the correct MAC address for each routers. If the other 2 are already set as an access point it still needs to have the correct MAC address of the routers that is on the network.try also disabling the WEP/WPA on the routers or might as well just use the 64bit WEP because sometimes it would affect the connectivity. Its much easier if you to test with the 2 routers first having one set as an access point, from there if everything is ok, then configure the other one.
2006-11-21 11:29:34 · answer #1 · answered by tib0r 1 · 0⤊ 0⤋
a 'g' router, attempt to be close ike some yards the sign's susceptible as they are the 1st routers on the industry when you consider which you won't be able to locate you're cd attempt this: a million) on the main astounding backside of the show ( the place the quantity is) you will discover a show screen precise click your mouse and look for view community look on your router's call (be close to to the router) choose for it and executed 2) get close to to the router unplug it, wait 2 minutes plug it back and notice in the experience that your laptop come upon it if sure, executed
2016-11-25 23:35:54 · answer #2 · answered by Anonymous · 0⤊ 0⤋