How would one go about hooking up a turntable to the computer.?

Question

I have numerous 78 rpm records that I would like to record to CD...how and can the turntable be hooked to the computer and download the 78s...I don't own a CD recorder other than the one on the comput....Thanks

Answer 1

You could just use a plain white-and-red to digital output cable. You can get one at any Radio Shack or store where they sell mp3 player acessories. Think of just your regular white-and-red audio cable with a 1/8" headphone jack on the end. Anyhow, you could plug this into the mic input on your soundcard in your computer, and record each side of the album and break in into tracks. That would take some effort, but it's the cheap route. You could buy a turntable that comes with a USB output and software to simplify this for about $100 if you feel like it. Google for it!

Answer 2

such a good number of complications the following. is the turntable is operating an MM pickup, a ceramic , an MC, ect? did you recognize? Tuner inputs are in a good number of cases nonetheless not smooth sufficient to "listen" the tiny signal output impressive, or waiting to the finest option the signal curve both. There are boxes you may get, that take the position of a phono enter, and impressive improve the signal so it will be jacked in to the time-honored suspects.. You wont have a issue looking those, as few cutting-part receivers have a phono jack anymore. The separate phono pre-amps have grow to be extremely difficulty-loose, the position contained in the previous, they were contained in the province of audiophile hobbyists searching for sonic heaven. Get one. no matter if there is something "undesirable" with the turntable contained sooner or later, it will make existence a lot more convenient, or perhaps likely) with the subsequent. DJ and studio equipment, of route nonetheless have the necessary inputs for tables, or extra impressive the cartridges they use.

Answer 3

We have an old 60's model record player and we just recorded some records on the computer from that. The turntable has to have a 'line out' jack on it, then it's simply a matter of putting a connecting cord from the out jack to the 'line in' plug on the back of the computer. You DO need a program to collect it though. We used a free one called 'audiograbber'. (It came on a free disc on a computer mag and works well) You may have to search the web for this or something similar.