how do you remove a 96 chevy blazer fuel filter?

Question

96 s10 chevy blazer
4.3 v6 sfi

Answer 1

they are little clear plastic clips push the fuel filter toward the end of the line u want to take off push both tabs together and pull it a part but dont brake the plastic linesu might need a small screwdriver to get into the clips farther

Answer 2

a bit of advice....while the engine is running..pull the fuse on the fuel pump to dump the pressure out of the fuel line. That will help keep the spray down when the filter lines come off the fuel line. Pull the line off that heads to the engine first, very little fuel will spill cause its behind the filter element. When you get enough of the hose off from the gas tank side, cover the pipe with your thumb and work on getting the rubber hose ready for installation.
Good Luck....

Answer 3

WOW!!!!!!!!!!!!!!!!!!!! 3 Gallons of gasoline???? Geez, i thought i substitute into sluggish, I oftentimes can substitute them below 30 seconds. gasoline will run out because of the fact of sometimes the Evap gadget applies a small volume of stress to the interior the gasoline tank to do leak exams, it extremely is amazingly minor stress even if it extremely is sufficient to reason the gasoline to proceed to expire, after some seconds of the gasoline working out, it surprisingly plenty creates its very own syphoning form deal. even if it extremely is customary, you only must be a sprint speedier next time. uncertain how in the international you have the flexibility to interrupt the gasoline line while changing a clear out.. That device you used likely destroyed the top of the gasoline line. If it has the plastic clip on the top, those are the least confusing ones to do

Answer 4

It will either have screw type fittings or plastic clips that you have to push in on both sides and pull apart. It is easy to do.

Answer 5

above answer is correct just be carefull the line is under pressure
you might take a gas bath if your not carefull.
ase tech