I just installed the headlights on my car but see that i need to regulate the direction of the light projection.
How should i do it and what tools, if any, to use?
where could i buy these tools
Thanks
2006-11-18 13:07:59 · 4 answers · asked by vigleeni 1 in Cars & Transportation ➔ Maintenance & Repairs
head light are easy to adjust you Will need a wall and about 25feet of level ground and a screw driver look up this sit
http://www.automedia.com/Aiming/Headlights/ccr20010801ha/1
2006-11-18 13:22:57 · answer #1 · answered by Anonymous · 1⤊ 0⤋
Use the same tools you used to install the head lights. Point your car at a building that has great reflection and adjust from there. You will be able to see the direction of each light as you adjust it. This is how we did ours, it worked great.
2006-11-18 13:11:27 · answer #2 · answered by Help Me Help You 3 · 1⤊ 0⤋
basically get a yard stick and measure from the ground to the middle of the head light. the park your car as perpendicular to the building as you can, and then measure approximately 30 feet away and mark the building the same distance you measured the headlights, then adjust to just below the line...
also measure the distance between them and also mark the wall at this point too, this is approximately at this point...
good luck
smile
2006-11-18 13:17:52 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Check this
2006-11-18 13:13:50 · answer #4 · answered by Skypilot49 5 · 0⤊ 0⤋