Two motion sensors were disconnected by accident.How do i re wire and reset the alarm? I have determined the permanent live and earth ( red & black) also determined two other wires(green & yellow) which have current(slightly lower than red wire). Blue & white wires have no input current.On the main box, blue & yellow are wired to the terminal blocks together(one in each screw point).Green & white are also wired in together.
Coming off the sensors are black,red,yellow & blue.Rewired how i thought would go, does the box just need resetting?Can anyone help, much appreciated. Codes from alarm display show CE232323 CE33172
2006-11-18 08:34:56 · 2 answers · asked by pravesh2264 2 in Home & Garden ➔ Other - Home & Garden
You will need to contact the maker of the alarm system or a contractor that installs this type of system.
2006-11-18 11:16:56 · answer #1 · answered by aussie 6 · 0⤊ 0⤋
I have an old ADT system that was installed prior to buying our house last month. I don t really need monitoring but would like the alarm features and fire detection of the installed system. I have the code but the system is unplugged. I don t want a $25/mo fee. What would you do? Would we be better off using something that is wireless and purchased by us??? 4) You can even get DIY 100% wireless systems that you can upgrade at any time, and even move with you. You could even change service providers if the equipment can be used by another provider - so you are not stuck by any means.
2016-03-29 00:51:21 · answer #2 · answered by Anonymous · 0⤊ 0⤋