English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

2 answers

Remove the cover on the diagnostic plug
4 pin plug: Jumper terminals C and D (lower terminals with locking tab at the top).
6 pin plug: Jumper terminals D and E (lower left terminals with locking tab at the top).

Start engine (make sure it is at operating temp) and set the timing. When finished remove jumper and re-install cover.

2006-11-18 07:18:11 · answer #1 · answered by whtsthislif4 5 · 0 0

what year and what engine as they vary in settings need a little bit more info there

2006-11-18 15:23:20 · answer #2 · answered by gav552001 5 · 0 0

fedest.com, questions and answers