i have set the TVS Lucas Distributor D23 with about 8 deg static advance. the tail pipe has black soot which was not there earlier with almost the same advance and similar carburettor setting and tappet setting.please advise.
also, the premier padmini manual talks about different values for runnig tappet clearance and tappet clerance for valve timing. please explain, how to set these valuesas the values mentioned for these two are from 0.1mm and 0.37mm. how to set and check the latter value?normally we find that the tappet cover is taken out and tappet clearances are set to about 0.1mm in static condition.is this the right way?
is always droplets through tail pipe during the first few kms run in normal/cool weather an indication of optimum tuning?
2006-11-18
04:10:57
·
2 answers
·
asked by
narayanaraosristy
1
in
Cars & Transportation
➔ Maintenance & Repairs