English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

4 answers

easiest way is to unplug the 2 plugs in the air filter intake hose. Then pull the plastic tube out. Then loosen the clamp on the intake and the one on the other end near the air filter. Take off the rubber hose between air filter and intake. Then unclip the 2 clips on top and pull cover off. Reverse for install. Just make sure to plug wires back in or your check engine light will come on.

2006-11-18 08:42:47 · answer #1 · answered by rwings8215 5 · 0 0

remove the top( possibly clamps and hold down nut) remove old filter, clean out box, install new filter, replace cover. I would replace the stock filter with a high volumne low restriction type.
Have fun day

2006-11-18 03:50:54 · answer #2 · answered by ? 4 · 0 0

theres a tube that runs from the throttle body,take it off and then you will see a square box,you should see at least 3 of 4 screws,take them out and lift the cover,and there it is.

2006-11-18 03:52:09 · answer #3 · answered by Anonymous · 0 0

It alright could desire to be . as quickly as you plug it back in and your easy remains on after turning the motor vehicle on and stale returned ,you may could desire to disconnect the battery for 60 seconds and reconnect it .force it and see what happens.

2016-12-29 04:48:33 · answer #4 · answered by ? 3 · 0 0

fedest.com, questions and answers