English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

How exactly it works, and what is the most preferred speed top write? Experts pls explain...........

2006-11-17 18:48:47 · 5 answers · asked by san j 1 in Computers & Internet Other - Computers

5 answers

The rate at which CD-ROM drives can transfer data from the disc is gauged by a speed factor relative to music CDs: 1x or 1-speed which gives a data transfer rate of 150 kilobytes per second in the most common data format. By increasing the speed at which the disc is spun, data can be transferred at greater rates. For example, a CD-ROM drive that can read at 8x speed spins the disc at up to 4000 rpm (compared to the 500 rpm maximum for 1x speed), giving a transfer rate of 1.2 megabytes per second. Above 12x speed, vibration and heat can become a problem. CD-ROM drives above this speed tackle the problem in several ways. Constant angular velocity (CAV) drives spin the disc at a constant rate, leading to faster data transfer when reading from the outer parts of the disc, but slower towards the centre. 20x was thought to be the maximum speed due to mechanical constraints until Samsung Electronics introduced the SCR-3230, a 32x CD-ROM drive which uses a ball bearing system to balance the spinning disc in the drive to reduce vibration and noise. As of 2004, the fastest transfer rate commonly available is about 52x or 7.62 megabytes per second, though this is only when reading information from the outer parts of a disc. Future speed increases based simply upon spinning the disc faster are particularly limited by the strength of polycarbonate plastic used in CD manufacturing, though improvements can still be obtained by the use of multiple laser pickups as demonstrated by the Kenwood TrueX 72x which uses seven laser beams and a rotation speed of approximately 10x.

CD-Recordable drives are often sold with three different speed ratings, one speed for write-once operations, one for re-write operations, and one for read-only operations. The speeds are typically listed in that order; ie a 12x/10x/32x CD drive can, CPU and media permitting, write to CD-R disks at 12x speed (1.76 megabytes/s), write to CD-RW discs at 10x speed (1.46 megabytes/s), and read from CD discs at 32x speed (4.69 megabytes/s).

The 1x speed rating for CDs (150 kilobytes/s) is not to be confused with the 1x speed rating for DVDs (1.32 megabytes/s).

Ideally for writing a cd dont go for writing speeds more than 16X and for DVD dont go for writing speeds more than 12X

2006-11-17 19:02:43 · answer #1 · answered by life goes on... 2 · 0 0

16x^2+24x Ignoring for the moment the terms in 'x' 16 has the factors 2, & 8. (2 x 8 = 16) 24 has the factors 3, & 8 (3 x 8 = 24) So '8' is a common factor which be 'taken out'. Hence it becomes 8(2x^2 + 3x) Now bringing the terms in 'x' in to play. x^2 has the factors x times x = x^2 x has the factors x time 1 = x So 'x' is a common factor that can be taken out. Hence it becomes 8x(2x + 3) THe answer !!!!!

2016-03-29 00:17:11 · answer #2 · answered by Anonymous · 0 0

the base number, 1X, means writing/reading 150KB per second.

other number are multiplier of this number. for example 10X means 1500KB per second.

i think the best speed for writing a CD is 40X. it is supported by the most CD-ROMs (even old CD-ROMs) and it is fast enough.

i heard that we should write a VCD under 32X otherwise VCDs cannot read the CD correctly. but i am not sure. you should test it!

2006-11-17 20:13:44 · answer #3 · answered by IsaacArsenal 3 · 0 0

these terms defines the read speed of the cd that u r burning

more the speed less the lift of the cd
and less the speed more the life of the cd

2006-11-17 19:57:18 · answer #4 · answered by Anonymous · 0 0

these numbers tell you how fast your machine can read and copy

the higher - the faster

2006-11-17 18:51:54 · answer #5 · answered by tom4bucs 7 · 0 0

fedest.com, questions and answers