I Want to install sound device in my PC.
2006-11-16 17:18:58 · 8 answers · asked by smaheshs_1980 1 in Computers & Internet ➔ Hardware ➔ Other - Hardware
buy a sounds card isntall the cd rum software and put it in the soudn card slot it will either be agp or pci format and the unscrew port and attach speakers into it and you are set you will need screw drivers
2006-11-16 17:22:35 · answer #1 · answered by scenekid13542 2 · 0⤊ 0⤋
Go to a computer shop tell them to give a Sound card and two speakers and come home open your computer CPU cabinet (make sure that the power turned to off before open the cabinet) read the manual before try to fix the Sound card then put the sound card in to the slot (the slot is indicated with the sound card manual) and then re fix the cabinet in to the earlier position then power on the computer then you find some message like new hard ware found then you put the compact disc which is also with the sound card then follow the procedure after that connect your speakers in proper place then re boot your PC. If you do all these things in correct way it become ready to use means you got the sound in your PC, Other wise check your PC with a Hardware Engineer...... Best of luck.
2006-11-16 17:36:02 · answer #2 · answered by Anonymous · 0⤊ 0⤋
duct tape.
Kidding. chances are it's a PCI device. there should be a white (it may not be white) slot in your computer the size of the connection on the bottom. line that up and push it in (gently). then boot up the computer and install the software. you're done!
2006-11-16 17:22:12 · answer #3 · answered by Justin V 5 · 0⤊ 0⤋
pass to settings/administration panel/equipment/device supervisor and delete the sound device and close down. Reboot and you're able to get the message "new device got here upon" see if homestead windows can set up it from the homestead windows data. whether it is not there you will could acquire the driving force and set up it manually.
2016-10-22 05:51:57 · answer #4 · answered by janski 4 · 0⤊ 0⤋
if it is integraded in to the mobo then you find out who makes the mobo (printed on the mobo) go to the website and download a new driver a driver is a bridge between operating system (os) and your motherbord (mobo)
2006-11-16 17:26:47 · answer #5 · answered by Anonymous · 0⤊ 0⤋
1) buy a sound card
2) open case and snap it into a PCI slot
3) power up pc and it should be recognized.
2006-11-16 17:22:04 · answer #6 · answered by m-t-nest 4 · 0⤊ 0⤋
Use duct tape and a big hammer.
2006-11-16 17:26:24 · answer #7 · answered by Anonymous · 0⤊ 0⤋
go to a computer shop
2006-11-16 17:23:01 · answer #8 · answered by love_doctor 4 · 0⤊ 0⤋