how do i increse my p-4 comp w/128 mb of ram to 256?

Answer 1

just go to any computer store and get a 128 SD DDR RAM if thast what your computer takes ( ask a technician if your not sure) and open up ur pc .. insert it in teh next slot ( next to themanufacturers RAM. and lsn to it click !!! then close your computer .... and voila ... u got 256 .. however i would suggest you rmove teh 128 u have ( manufacturers part) and install a 512 or a 1 GIG ram ... im sure your mother board will take it
from 128 to 256 wont do much ... if you have p4 you ned to get a 512 to get the most out of it...

Answer 2

Add memory card which is easily available in ur hardware store.

Check which memory ur board supports. Some support
DDR Memory or SD memory.

If u use more graqphic/image processing I would suggest for a 512MB RAM, provided u have a DDR memory, as SD memory is going out of the market.

Answer 3

Just add more if you have a socket open .Or switch out the 128 for a 256 if dont have an open socket.

Answer 4

Go to any computer store (or buy online , its cheaper) and ask for a 128mb dimm of ram.
Make sure its the same speed (mhz) as the ram you currently have in your pc, and that you have a spare slot on your motherboard for the stick of ram (dimm) to go in.

Answer 5

Remove your 128mb stick. Go to the computer store, show it to them, and say I need another 128mb like this. This will ensure you have the correct memory type. If you only have one slot, get one 256mb stick. If you are upgrading, I would recommend at least 512mb.

Answer 6

Go to a computer store and buy some more memory. Or search on line and you should be able to find what you need.

Answer 7

viagra