2006-11-16 07:17:03 · 2 answers · asked by Velia L 1 in Computers & Internet ➔ Hardware ➔ Monitors
In response to the previous answer, The refresh rate _may or may not_ be the problem. A way to fix this without Safe Mode, is to plug another monitor into the computer, and use the Properties to adjust the resolution lower, _and_ make sure the refresh rate isn't over 75 Hz. Another way is to open your computer and get a flat head screwdriver, inspect your motherboard until you find a watch battery mounted to it, use the screwdriver in between the battery and the small tab sticking out of the mounting and pry out the battery. Hold down the power button for thirty seconds, then leave the computer alone for five minutes then snap the battery back in This will reset all hardware related settings, the clock, etc. If you don't want the settings changed or too squeamish to open the machine, Safe mode may work!
2006-11-16 09:08:54 · answer #1 · answered by Sean Brackeen 3 · 0⤊ 0⤋
Reboot into safe mode, then change the Refresh Rate to 60hz in the display properties under adapter.
To get to safe mode, restart the computer and hit the "F8" key right at the moment it says "Starting Windows" right after the BIOS posts it's information. It's ok to hit it several times. Then Select Safe Mode.
Once in Safe Mode, right click on your desktop (not on any icons), select properties, click on the "Settings" tab on the top right, click on "Advanced", click on the "Monitor" tab, then select "60" under Screen Refresh Rate. Click OK a couple times, then reboot.
2006-11-16 15:22:13 · answer #2 · answered by Pete G 2 · 0⤊ 0⤋