as anyone encountered a puzzle ring- i have a 4 piece one?

Question

Can you explain the solution to get my ring back as one ring and to solve the problem

Answer 1

Very easy But hard to explain , but here go`s ......, take the to V shape pieces hold them on the end of your index finger so they are opposite to each other ( the point`s facing out over ) now hold the two bit`s that are hanging down with your left finger & thumb ( at this point you need to keep hold of the two bit`s that where hanging ) now drop the 2 V pieces .
Now you need to twist these 2 pieces in your left finger & thumb together ! to do this hold the 2 parts from the base ( the bit without a pattern on it ) don`t turn the ring`s you have to "twist "them 1 clockwise the other anti clockwise ( like you would turn a worktop kitchen cooker hob on/off )the 2 pieces will lock into one another , when they do ( here`s the tricky bit ) you need to thread each one of the V pieces through the gap`s in the bit`s that have locked together ! sound`s very complicated but it is very easy to do ! tap puzzle ring into your search engine and you will see what i mean .but the plan`s on there are very hard to follow but with these instruction`s you should get it sussed in no time at all . once you have done a 4 piece they are all the same after that , i just done a 8 one the other day !!!! good luck failing that send me your email and i can do it for you via the web cam ( just follow what i do !

Answer 2

That's the point of the ring, figuring it out. I can get mine back together in about 5 minutes now. You just have to keep trying, if you really can't, ask a jeweller to do it for you.

Answer 3

I used to cast these and there are thousands of designs. I could arrange them when first cast but if one came in for repair I was lost. Take it into a jeweller who may be able to 're build' it.
Loads of people end up getting a wee solder in the back to permenetely join it.

Answer 4

Try this site;
www.puzzleworld.org/PuzzleWorld/puzzle_ring_solution.htm

Good luck!