English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Just replaced the front sensor and the light went out .I went to start the car up a day later never driven it since the sensor installed and now the light is on again.Its not a fluid problem and the rear sensor is fine...

2006-11-15 07:44:52 · 5 answers · asked by DR.Frankie 2 in Cars & Transportation Maintenance & Repairs

Front and rear brakes are brand new

2006-11-15 07:54:16 · update #1

5 answers

Brake warning light comes on for a few reasons, pad wear, fluid level, master cylinder cap insecure or of course the wire has the insulation worn through and is earthing out somewhere

2006-11-15 08:30:07 · answer #1 · answered by gav552001 5 · 0 0

2 issues to verify. First, verify your gas filter out. it may be clogged and would desire to get replaced. it is placed on the backside coated up by potential of a chew of plastic shell precise below the driving force's seat. it may be so clogged that it is leaking and your gas transport isn't consistent. 2d, verify you gas pump. attempt it out with a volt meter and spot if it is in stable working order. If it is not replace it. The gas pump is submerged into the gas tank, placed close to the rear passengers component, below the seat. Pull the seat cushion and you will see the place it is at. BTW, no longer basically like the previous jackass that published the iX is crap, the iX is genuinely an astounding automobile. It does require maintainence, regardless of the undeniable fact that it somewhat is an astounding layout. That jackass in all probability drives around in a Cavalier or use mom's Tahoe whilst the Cavalier is interior the shop.

2016-12-10 09:47:01 · answer #2 · answered by kulpa 4 · 0 0

Take it back to whoever worked on your brakes and DEMAND they fix it. It seems all the "mechanics" are rank amateurs. I read post after post on here about "I took my car in for repair and now
it's worse than when I took it in". The shop you went to had poor workmanship to say the least. I would guess you have something that was damaged when the brakes were replaced.

2006-11-15 08:40:29 · answer #3 · answered by tronary 7 · 0 0

Go to a garage NOW, before you have an accident and kill yourself or somebody else ! Sorry to be so brutal ,but this is what could happen. You dont mess about when it comes to the brakes.

2006-11-15 08:34:34 · answer #4 · answered by blackmac4218 1 · 0 0

its time to check the breaks

2006-11-15 07:50:13 · answer #5 · answered by realkool01 2 · 0 0

fedest.com, questions and answers