Straight down is normally down, horizontal is off and straight up is reserve.
2006-11-15 18:43:14
·
answer #1
·
answered by charlie 3
·
0⤊
0⤋
is it a vacuum operated tap? if so it should have 2 pipes on the back, one for fuel outlet and the other thinner pipe goes to your inlet rubber. when the engine is running it sucks on the diaphragm in the tap and allows fuel to run out. disconnect the fat pipe and turn the tap till it stops running. it probably only has 2 positions, on or reserve. leave in the on position and it should be okay, if not turn it to the other position, if it still runs fuel you have a dodgy tap and are relying on your float to stop it running. be ready with a fuel proof container to catch what is in the tank.NO SMOKING! good luck. ;-)
2006-11-15 04:53:36
·
answer #2
·
answered by ted zzr11 turbo 1
·
0⤊
0⤋
I think it's mostly assumed that vertical (or straight down) is on and Horizontally (pointing back or front) is off.
2006-11-15 08:34:22
·
answer #3
·
answered by Anonymous
·
1⤊
0⤋
Down is on, up is reserve, to the left shuts it of.
2006-11-18 01:01:28
·
answer #4
·
answered by Nichola c 2
·
0⤊
0⤋
Horizontal is off.
2006-11-15 12:38:07
·
answer #5
·
answered by FangStu 3
·
1⤊
0⤋
It should be marked on it, but its in the centre.
2006-11-15 02:52:29
·
answer #6
·
answered by Goofy Goofer Goof Goof Goof ! 6
·
0⤊
0⤋