English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Not what size but what specific models memory sticks.

2006-11-14 16:14:33 · 8 answers · asked by Daniel M 1 in Computers & Internet Hardware Desktops

8 answers

.
At the site Crucial.com
they have a cool tool that will tell you
exactly the kind of RAM you need for your system and how much you can add.
It's free...
they hope you will buy your ram from them...and I do recommend their product.

k.

2006-11-14 16:17:44 · answer #1 · answered by Anonymous · 0 0

If you can't afford to take your pc to a repair shop and have them put some RDRAM (Rambus Dynamic Random Access Memory) RIMMs (Rambus In-line Memory Modules) and CRIMMs (Continuity Modules) CRIMMs must go into the unused slots. Unplug your pc, open it up and remove the RIMMs and CRIMMs. Put them into a static bag (a sandwich bag will work) immediately to avoid static discharge. Go to a pc shop and get another two or three sticks just like them. (either PC600 or PC800) they must be the same, do not miss match them. Put the matching RIMMs into the first two or three slots, then the CRIMMs into the second two (one) slot (s). Or upto four 512MB RIMMs into all the slots. ECC and non-ECC type RIMMs my be combined. You can use 128MB, 256MB or 512MB, but you cannot exceed 2GB maximum system memory!!! good luck ....pcr

2006-11-14 16:48:29 · answer #2 · answered by Primary Computer Repair 2 · 0 0

an i3 will completely ruin a Pentium ... you cant purely look at ghz there's a lot extra to it then that... you also favor to think about buss/center ratio's, numbers of cores and if its hyper threaded, the cpu's cache, DMI % (contained in terms of i3's) .... in short an i3 will smoke a Pentium area observe: As its been reported you want a GPU, and integrated chip on the motherboard likely isn't gonna reduce it for MW2

2016-11-29 03:53:12 · answer #3 · answered by ? 4 · 0 0

Closest I could find is was this:
http://accessories.gateway.com/AccessoryStore/PC+Accessories_316441/Memory_316624/System+Specific+Memory_316634/System+Specific+RDRAM_316637/1932494_ProdDetail

It's for the E-4600 XL Deluxe 1.5GHZ P4.

If it were me, I'd go ahead and call Gateway at 1-800-369-1409, and see if this is the correct RAM for my system.

2006-11-14 16:34:09 · answer #4 · answered by Microsoft Bob 4 · 0 0

You'll have to buy either two of these: http://www.newegg.com/Product/Product.asp?Item=N82E16820151102 or two of these: http://www.newegg.com/Product/Product.asp?Item=N82E16820147302

I'd personally just give away the computer, and spend $300-400 on a new system, that will be 3-5 times as fast, though: http://www.newegg.com/Product/ProductList.asp?N=2032280010+4019&Submit=ENE&SubCategory=10

2006-11-14 23:37:16 · answer #5 · answered by alchemist_n_tx 6 · 0 0

i have PNY and it has worked good for 3 years now and i even over clocked it before and it was stable.the Crucial.com system scanner is down at least it was when i went to Crucial.com .
you will have to have DDR more than likely.go to http://www.crucial.com/store/listparts.aspx?model=420GR and that MAYBE what kind of RAM you have so CHECK it BEFORE you buy it.

2006-11-14 17:36:18 · answer #6 · answered by U can't B like me 5 · 0 0

I think you want RDRAM (Rambus RAM). It's going to be a pain to find, however. Try ebay, as most places no longer carry RDRAM.

2006-11-14 16:20:19 · answer #7 · answered by MikEnigma 2 · 0 0

I would say probably DDR 266 or maybe even as low as PC133.

2006-11-14 16:22:52 · answer #8 · answered by Anonymous · 0 0

fedest.com, questions and answers