English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Ok, I've had my violin for awhile now... No problems of the sort. And then the bridge popped while I was tuning it. I replaced it, and now when I play the D and G string, I can hear a slight buzzing/crackling noise. How can I fix this and what is wrong?

2006-11-14 16:07:03 · 2 answers · asked by srtrtst 1 in Entertainment & Music Music

2 answers

first check to see if the fine tuners for D and G are not loose ,vibrateing.I have experienced that sort of sound just from the fine tuner screw being loose. Then check to see if chin rest is loose and needs tightening. then check to see if sound post is properly in place. Next, hold violin near a stong light and look inside f-holes to see if there are any cracks near bridge area or around the seems of the instrument that let the light in. If there are , then you need to take it to a luthier, or a violin repair man. Your teacher should be able to tell you where the nearest repairman is if you are takeing lessons. A teacher should also be able to look at it and tell you the problem. If you don't have a teacher, then you could contact a music store and ask them to recommand a violin repairman.some music stores have a repairman.Ask the repairman to give an estimate of getting it fixed. Depending on the value of your instrument you can decide if it is worth fixing and how much he tells you. If your instrument is older, and had a better sound , it may be worth fixing. If it was a newer, cheaper instrument, it may be just as cheap to buy another new one.

2006-11-15 00:51:48 · answer #1 · answered by KaeMae 4 · 0 0

I am additionally a violinist. Yes, it's typical for there to be nicks within the bridge wherein the strings are. It maintains them in situation at the bridge. is there a rubber slidey factor at the E string. If so, that are meant to cross at the string wherein the nick is at the bridge. Because the E string is so skinny and so sharp, it protects the bridge from being sliced by way of wholly. How a long time have you ever been gambling? Also, what measurement violin do you've gotten? You are tuning properly, opening with the A, after which relocating to D, G, and E. Do you've gotten best tuners for your violin? (They are small circular matters close the chinrest, after the bridge). The pegs must best be used in the event you should not have best tuners or in case your strings are very, very out of track. If you've gotten Magic Touch Pegs, then you'll be able to use them as commonly as wanted. You could realize in the event you had Magic Touch. It is viable that you're pushing the pegs in too tough whilst tuning. Try to be somewhat extra smooth whilst tuning. NEVER EVER use the peg for tuning the E string, until it's approach out or you're re stringing your tool. Maybe take a look at tuning your D string first ( I comprehend it's no longer the correct order). Go, D, A, G, E. Have you ever converted you are strings? It maybe time to. I could additionally take your violin for a "determine up" to a nearby track retailer or your violin repairman. You must take you are tool two or three instances a 12 months for a checkup. If and while you do, ask them and and provide an explanation for to them what's going on along with your tool. You might want new pegs. I'm sorry that is see you later, however I desire it is helping. Feel loose to invite any extra questions.... i'm going to be comfortable to reply them!!! Good good fortune at some point, and well good fortune with you are violin!

2016-09-01 12:47:03 · answer #2 · answered by greenland 4 · 0 0

fedest.com, questions and answers