2006-11-14 02:14:15 · 9 answers · asked by Emily R 1 in Cars & Transportation ➔ Maintenance & Repairs
Check the fuzes would be the first step.
The next step would be to insure that the wipers are properly secured to the post. Remove the cap that covers the pivot point and make sure that the wiper set screws haven't worked loose.
The third step would be the check and see if there is a timing device/capacitor in the system, often found in variable speed wipers. This may have gone bad.
2006-11-14 02:25:13 · answer #1 · answered by Aggie80 5 · 0⤊ 0⤋
I'm guessing that you truck is a late80s to mid 90s Chevy. If so this is a common problem with these trucks. replace the circuit board on the wiper motor. about 45bucks if you do it yourself
2006-11-14 04:14:58 · answer #2 · answered by hawop 3 · 0⤊ 0⤋
Do you hear anything when you try to put them on? If you don't at all it could be a fuse. If you hear it at least trying to push, it could be the wiper motor or even a loose wire connection.
2006-11-14 02:23:30 · answer #3 · answered by kim914 2 · 0⤊ 0⤋
Could be the wiper motor, a fuse, a relay, or even an electrical problem.
2006-11-14 02:17:50 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Wiper motor is gone! Change the wiper motor. If not that the fuses or switch!
2006-11-14 03:45:35 · answer #5 · answered by shovelhead182005 2 · 0⤊ 0⤋
I think you mean "wipers" and you really need to give us more information on your vehicle if you want some help. We are not mind readers or magicians here.
2006-11-14 02:19:10 · answer #6 · answered by jarhed 5 · 1⤊ 0⤋
first thing i would check is the fuse,then the switch,then if they are all ok,then i would go to the wiper motor.
2006-11-14 03:18:49 · answer #7 · answered by Anonymous · 0⤊ 0⤋
What kind of truck, and what year?
2006-11-14 02:18:13 · answer #8 · answered by mtbman1016 2 · 0⤊ 0⤋
probably a fuse
2006-11-14 02:15:55 · answer #9 · answered by Mary Smith 6 · 0⤊ 0⤋