Dewalt is the industrial line from Black and Decker.. they have great warantees, they take a pounding, and last forever. they are definintely worth the money
2006-11-14 01:16:47
·
answer #1
·
answered by czekoskwigel 5
·
2⤊
0⤋
I've been in the trades a long time, and own/use many brands that suit needs. Certainly there are preferences in our species, much like colors, flavors, etc.
DeWalt is a quality product ISN"T expensive, has decent backup, and is widely used for those reasons and more. Dewalt can also be thought of as a tool investment that won't "Break you" even when it goes down, and has to be discarded or repaired.
You might also consider this,,,as a general example.
As I said we all have preferences. Think of 6 different brand names, dismantled on a work bench, components compared. Certainly you'll find differences, and many similarities. I don't buy a tool, or much else going by a brand name, but often from experience.
One thing I usually consider, is that Dewalt, at least up to the 14 volt, uses a charger that accomodates all voltages of battery, and even B&D in those voltage ranges, often fit, to charge.
If your Craftsman suits you, gives you good service, I suggest keep it until it dies.
I keep Dewalt, Skil, Craftsman, Porter, Mikita, Michigan, Ryobi, etc. and use them specifically to a particular job. I do find that "Off" brands such as Chicago, do not meet my needs.
Rev. Steven
2006-11-14 01:43:22
·
answer #2
·
answered by DIY Doc 7
·
0⤊
0⤋
I do doors and cabinets and was using Royobi, I went through three drills in one week. I got Dewalts and have had no problems. In addition to the quality of the Dewalt though, I like to have a standard also. This way I don't have to look for one tool for a Royobi, one for a Craftsman, one for a Dewalt. It just makes it easier. If you do a lot of heavy work, I would recommend the Dewalt, if you are just doing home or light industrial, any of the other brands will work.
2006-11-14 01:38:11
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
Dewalt is for commercial and Industrial use, Having steel gears inside compared to plastic, B&D, Craftsman are good tool but are more designed for the home owner that does weekend work as with Dewalt is for everyday use in rough conditions. with many different cordless too from 7.2 volt to the newer 24 volt tools, I have Faith in Dewalt tools.
2006-11-14 08:06:30
·
answer #4
·
answered by Ray D 5
·
0⤊
0⤋
DeWalt is really top of line tools. The reason contractors use them is DeWalt is dedicated to their contractor users, and ordinary users as well.
If you need power tools to make a living, then DeWalt is what you get.
Otherwise Craftsman, Milwaulkie, B&D Skill, etc etc. is OK.
2006-11-14 01:23:55
·
answer #5
·
answered by bob j 3
·
0⤊
0⤋
Go with the new Milwaukee 18V Lithium-Ion Cordless Drill. A little pricey at about $300 but you get a 5 year warranty on the tool and 5 year warranty on the batteries! I've used mine since they came out last year and haven't had any problems. My old DeWalt ones have found their way into the trash. The quality of the tools have just seemed to have gone down hill.
2016-03-28 05:13:08
·
answer #6
·
answered by Anonymous
·
0⤊
0⤋
dewalt outlast any other brand I have had a workshop for years and used many different brands my dewalt tools have yet to be replaced. crafstman is pretty good but no where near last as long as dewalt. Skil last ya about a week. but for the price delta is your best buy!
2006-11-14 15:50:31
·
answer #7
·
answered by right answer 2
·
0⤊
0⤋
Craftsmans okay, they do have a good guarantee. DeWalt may seem expensive when compared with the cheap brands, but it is moderately priced and very good. Milwaukee is probably a better brand along with Porter/Cable. For hammer drills I like Milwaukee best, for saws I like Porter/Cable. For drills and screw guns I like DeWalt.
2006-11-14 01:25:13
·
answer #8
·
answered by Thomas S 6
·
0⤊
0⤋
I used to use a Craftsman... couldn't take the punishment and batteries never lasted... bottom line... need a tool you can depend on... DeWalt and some of the more expensive Makita and Ryobi are well worth the money if you depend on your tools to make a living...
2006-11-14 01:25:26
·
answer #9
·
answered by jeep_man129 3
·
0⤊
0⤋
You get what you pay for...I've had craftsmans hand tools for years,handed down by my father,who used them to repair airplanes in air force.But the power tools? *Cough*Choke*Gasp*, NEVER lasted, broke down in middle of job,etc.Very disappointed customer. I know DeWalt quality when I see fellow contractors using same thing. I even bought my brother a set.And he only uses his for around the house.Why? Because they last! And can be repaired. Plus,when you work ,YELLOW stands out and can always be found.I have a reflective orange stripe so none of my co-workers walked off with my tools!
2006-11-14 03:56:06
·
answer #10
·
answered by auntgnu62 3
·
0⤊
0⤋
My Dewalt cordless drill 12 V lasted me almost fifteen years and It's been through hell.
2006-11-14 01:43:59
·
answer #11
·
answered by cowboydoc 7
·
0⤊
0⤋