Lost tool to remove where can I find one??
2006-11-13 13:17:54 · 9 answers · asked by Peter M 1 in Cars & Transportation ➔ Maintenance & Repairs
you need a hub cap key. from 1981-1989 go to a junk yard and purchase one. it has to be the same kind of a car though.
2006-11-13 13:23:53 · answer #1 · answered by jbearbooboo 3 · 0⤊ 0⤋
Cadillac Hubcap
2016-10-18 11:06:45 · answer #2 · answered by fawaka 4 · 0⤊ 0⤋
There were a number of different lock wrenches made for your car. Go to your local dealer and ask the parts department to check your VIN, or your build code. They can then do a parts search on line and find out if one is available in your area. Go to a small dealer if you can. They usually will be more helpful than a large dealer.
2006-11-13 15:41:54 · answer #3 · answered by B H 3 · 0⤊ 0⤋
Cadillac dealer parts department. Think there are about 8 different ones. You could hammer a large screwdriver or tire iron into 'lock' and twist off. (this lock is neccessary to hold hubcap on)
2006-11-13 13:32:31 · answer #4 · answered by Lou S 2 · 0⤊ 0⤋
i know what your talking about,i got a 88 olds that has them kind of hubcaps.i guess all i can tell you is,go to the junk yard or a gm dealer,or you can order 1.you might find 1 of those tools in back of a old junk car,at the junk yard.
2006-11-13 13:56:12 · answer #5 · answered by Anonymous · 0⤊ 0⤋
I would go to the dealer for the tool myself especially if the car is in good to pristine condition .but if you just want them off grind off the bolt heads with a dremel tool and some cutting wheels take the caps off and unscrew the rest of the retainers with vice grips .but remember to take one up to the hardware to get metric replacement bolts ACO(CARRYS THE MOST ASSORTMENT)or your local hardware a GRADE-5 BOLT IS RECOMENDED WITH STAR WASHERS(I did it to a CHRYSLER NEW YORKER SOME YEARS BACK WORKS GREAT),AUTO-ZONE AND MURRAYS CARRY SOME TOO .
2006-11-13 13:32:51 · answer #6 · answered by dinosaur 4 · 0⤊ 0⤋
If the antenna is located on the front fender, you will have to remove the tire and inner fender well, which is plastic. After this it should be clearly visible. Remove a few mounting bolts, the mounting flange on the top of the fender and usually one electrical connector.
2016-03-17 07:09:42 · answer #7 · answered by Anonymous · 0⤊ 0⤋
You might be in trouble those were like a key none were alike!
2006-11-13 13:23:47 · answer #8 · answered by Old Guy 4 · 0⤊ 0⤋
a dealer may be able to get you a replacement . good luck with this one!
2006-11-13 13:20:28 · answer #9 · answered by sterling m 6 · 0⤊ 0⤋