i already have a router that my husband uses for his xbox live, i am getting a laptop , i was wondering if i could set up wireless in the bedroom and keep the router in the living room, also could i use the laptop in the livingroom
2006-11-12
23:51:02
·
7 answers
·
asked by
NOT TELLING YOU LOL
5
in
Computers & Internet
➔ Other - Computers
i would have a router in the living room for the xbox and a wireless one up stairs in the bedroom
2006-11-12
23:55:37 ·
update #1
hi
yes ,as long as the router in the living room has wireless capability,and the bedroom isnt too far away from it,your in business
make sure though that you are using a good wireless connection on your laptop,as some connections on laptops or usb devices are limited to 54 mbs and you really need one around 100mbs(megabits per second)to have a good connection
but dont worry as most intergrated wireless laptops are 100mbs
as standard,but if they are not just invest in a usb or pcmcia wirelss adapter which can be bought for less than £25
good luck
2006-11-13 02:50:36
·
answer #1
·
answered by brianthesnail123 7
·
0⤊
0⤋
Does your router also have wireless capability? If so, you need nothing more - just configure the router and laptop to talk to each other. If your house is not a mansion, then the wireless coverage should extend throughout the house (or most of it).
If your router doesn't have wireless capability you'll need to buy a wireless access point. This will plug into the router (with a wire) so would need to be located near to the router and will then need configuring to talk to your laptop.
Whichever your situation, you don't need a router in the bedroom.
2006-11-13 00:18:43
·
answer #2
·
answered by Anonymous
·
0⤊
0⤋
http://www.oreillynet.com/pub/a/wireless/2003/03/21/home_wifi.html
http://support.microsoft.com/kb/810955/en-us
http://wireless-networks-only.com/
How to Setup Wireless Networking & Security in Your Home
Basic Hardware requirements:
1 Broadband connection point+broadband modem (Cable or DSL)
1 Access Point (I like the Linksys WRT54G Wireless-G Router)
1 Computer downstairs with wireless access capabilites
1 Computer upstairs with wireless access capabilites
When you connect your new access point for your wireless home,
you'll find almost every vendor's hardware works right out of the
box. Simple, 5 minute setup time they advertise and it's true more
often than not.
But, are you done with your wireless setup? The simple answer
is no, you're not! Let's look, though, why that answer is really
not so simple.
Depending on the hardware that you purchased, there are many
configuration changes that you could implement. Since we can't
possibly cover every piece of hardware on the wireless market
and every setting they may have, we're going to focus on wireless
networking as a whole. First thing, let's get that wireless
network some security. Now, while this won't be impregnable
security, it will add some layer of protection while we work
on the other parts.
Remember, security is like anything else, just one strategy doesn't
defend against every possible negative thing. We have to approach
this in a "multi-layered" way.
So we're ready for our first level of security. Let's log into
our wireless access point and add a WEP or WPA key (which one
depends on the hardware you bought. Some do both types of security
key, some only do WEP). We'll want to assign a 128-bit key (a 256-bit
key is preferable if your hardware supports it).
One point here though is that your wireless access point and
the wireless cards in your computers or handhelds must be able
to support the same protocol and encryption level you choose.
If they don't match, your device isn't getting connected. You
have to enter the same key on your computer's wireless card too.
Now, let's change our SSID (this is the wireless name of your
network). As an example, a Linksys brand wireless access point
(WAP) has a default SSID of LINKSYS. We don't want to leave it
this way. All the people that want to break into your WAP knows
that LINKSYS SSID has a default login of ADMIN with a password
of ADMIN.
You should think of something clever, but something not too
easy to break into. You'll also want to turn off broadcast of
SSID after you change it's name. That way sniffer programs that
look for SSID's won't be able to see your WAP is online. Some
examples of good SSID's are:
MEMBERSONLYTODAY
UCANTUSEME99
DONTLOOKNOWICAUGHTYOU38
GOAWAYYOUBOTHERME97
YOUCANKNOCKONLY66
Ok, we're on a roll. We have a few layers of security in place
(The SSID is changed, the channel we broadcast on is not default,
the SSID broadcast is turned off, we changed our WAP login/password).
Now let's get even more specific. We know we have X amount of
computers in our home (for example let's say 2, 1 desktop and 1
laptop). So in the DHCP IP section of our router, we can tell
the router to only issue 2 ip's.
That way if a third computer (one of our neighbors or someone) wants
to get on our network, they can't get an IP adress. Our last layer
is setting up the WAP to only issue IP addresses to specific MAC
addresses.
If you log into one of your computers and go to
start>run>cmd>and then type IPCONFIG /ALL into the dos window
One of the line items will be Physical address. Write down that
info, go back to your router administration screen and enter this
phsyical address. Only that MAC address can get one of your 2 IP
addresses.
Now go to your second machine (in this example) and do the same
steps. Only those 2 mac addresses will be sent one of the 2 IP
addresses.
Now, we've gone several layers deep to improve security on our
WAP and to keep intruders off the network. Most people will stop
trying if they have to defeat three layers of security, especially
for just a home network.
With this setup you have 6 layers and most likely won't see an
intruder. Keep in mind, each access point is different but these
basic settings are included in the major vendors (Linksys,
DLink, Buffalo, Netgear, Microsoft).
Enjoy your new wireless computing! Have fun but be safe!
2006-11-12 23:54:27
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
yes you can i often have my laptop in the bedroom and the router is in the front room cupboard
2006-11-12 23:54:47
·
answer #4
·
answered by robertboozychic 4
·
0⤊
0⤋
depends on how far the laptop will be from the router. anything more than 200+ or so feet you will start to lose signal and connection.
2006-11-12 23:54:12
·
answer #5
·
answered by thunder2sys 7
·
0⤊
0⤋
don't see why not
2006-11-13 00:00:43
·
answer #6
·
answered by Anonymous
·
0⤊
0⤋
yes
2006-11-12 23:53:50
·
answer #7
·
answered by Sir Sidney Snot 6
·
0⤊
0⤋