Can someone please tell me the best way to go about changing the "REAR" three sparl plugs, they are pushed right up on the firewall. Some people say from the top, from the bottom, whats the best way, I can't even see then looking from the top.........
Thanks in Advance
2006-11-12 21:58:42 · 3 answers · asked by ? 1 in Cars & Transportation ➔ Maintenance & Repairs
I always go in from the top. I just kinda feel my way along. You need a universal (jointed) socket, and can use a mirror if you want. To re-start the new plugs, put a piece of rubber hose on the tips, that will give you someting to hold it with (I use an old long plug boot without the wire clip in it).
2006-11-13 01:14:42 · answer #1 · answered by br549 7 · 0⤊ 0⤋
Any time I have replaced these, I have had to raise the vehicle on a lift and get them from underneath. Otherwise in order to get them from up top, you would need to remove the intake and that in itself is a 3 hour job.
2006-11-12 23:07:37 · answer #2 · answered by ? 6 · 0⤊ 0⤋
It is real tough. I have gained access from the botton and had to use a wrench, not a ratchet. God luck.
2006-11-12 22:23:16 · answer #3 · answered by ? 4 · 0⤊ 0⤋