just fxed up my 4runner and got the belt replaced and now its all loose and slips especially on my power steering pump. its a 2wd SR5 3.0 V6.
2006-11-12 11:21:54 · 4 answers · asked by mepc4u 1 in Cars & Transportation ➔ Maintenance & Repairs
there should be a tensioner pulley on it .. you loosen up the pulley nut and then turn the tensioner screw,... DONT forget to retighten the pulley nut
2006-11-12 11:27:17 · answer #1 · answered by blksheep22001 2 · 0⤊ 0⤋
Is it a single belt (serpentine belt) for all the pulleys or does it have 3 - 4 belts. i'm guessing the three - 4 belts. ability guidance pump is adjustable. Loosen/get rid of the two or 3 bolts. Take the belt off and look at it. Does it have cracks or are the chords coming off of the belt and does it look excessively worn. If specific to any replace with new belt, if not, replace previous belt and regulate pump consequently.
2016-11-23 18:12:11 · answer #2 · answered by ? 4 · 0⤊ 0⤋
tighten the pulley
2006-11-12 16:05:47 · answer #3 · answered by fourcheeks4 5 · 0⤊ 1⤋
tensioner arm needs to be adjusted :)
2006-11-12 11:24:29 · answer #4 · answered by prairie_babe74 2 · 0⤊ 0⤋