how do you solve the rubix cube without taking it all apart?

Question

my maths teacher can do it with his eyes closed, he showed us!
cmon, someone out there must know how to do this???

10 points

the first 4 answers are hopeless. you are rubbish and you dont answer my question.

i dont want to take off all the stickers and i dont want to sympthise with anyon 'ooh, i think it's hard too, hehehe.' SHUT UP.

there must be someone with a good answer out there.

wertry r- leave us all alone. you are a hopeless case.

suz1225, we're getting there, but could you explain a 2x2x2 corner and a bad edge?

Imani Sanders and jo h, both your answers are exactly the same.either imani, u are really stupid and you think i am dim enough not to notice and you are a cheater because you just copied and pasted the answer above you or you both just copied and pasted off the same website, which would be fine, but neither of you put that website in your sources. imani, even if the second option is true, you are stupid for reading the other answers- just to check....

this is complicated.
i can guarantee imani sanders will not get best answer.

Answer 1

ok first chose a colour ,say green for example.This will be your top face.Start by completing this side making sure all the colours match the next side,so all the green and whites are on the side with white in the centre,green and red on the side with red in the centre and so on.This will give you one complete (green side) and the top rows of all the other sides (except the bottom one) in the right place.next you need to complete the middle rows.Do this by finding the correct piece turning it one rotation away from where it should be,then move the left column down one,rotate the bottom row once to the left,left column up once,bottom row right once,right column down once,bottom column left once, right column up once.When you have repeated this with all the middle row edge pieces you should have your top (green) face and the top two rows of each side.Next you have to get all the bottom corner pieces in the right place but not neccessarily the right way around.They might already be in the right places if you are lucky, if not this move swaps them over.You must do this on the side you want to stay the same, so if you want to swap the 2 right hand corners then you do it on the left corners and vice-versa.so i will do it on the right hand side to swap the left.right hand column down 1 ,bottom round 2clockwise,right up1,bottom round 2,front face clockwise 1,bottom round 2clockwise,front face anti clockwise 1.bottom round 2 clockwise, left hand column down once,,bottom once anti clockwise 1, left hand up 1,bottom anticlockwise 1,right hand column down 1,bottom clockwise 1,right hand column up1.next you need to rotate the bottom corners to complete all the sides (except the bottom).looking at the bottom there should be one corner the corret colour in the right place.put this corner on the right at the back of the cube.then repeat this move until all the corners have rotated correctly.right hand column down 1,bottom clockwise 2,right hand column up 1,bottom clockwise1, right hand down 1,bottom clockwise 1,right hand up 1.Now you should be left with just the centre piece of each bottom row to rotate.There are a few different movews to do this depending on which blocks need moving.you need to move both edge columns up once then move the bottom row round once, edge columns back down, bottom row round 1.Keep doing this,but vary between one and two turns for the bottom row.I know this sounds really complicated, i have been doing my cube as i have been writing this to make it as clear as possible.Basically start at the top and work your way down through the rows.I hope this helps you!
JUST TO LET YOU KNOW...IN RESPONSE TO YOUR COMMENTS ABOVE, I DIDN'T GET THIS FROM ANY WEBSITE,THIS IS HOW I DO IT MYSELF AND HAVE DONE FOR YEARS.IT TOOK ME AGES TO WRITE IT ALL DOWN FOR YOU,ITS REALLY HARD TO DESCRIBE THE MOVES WITHOUT BEING ABLE TO SHOW YOU OR DRAW A PICTURE.YOU HAVE NO IDEA HOW ANNOYED I AM THAT THE PERSON BELOW HAS JUST COPIED MY ANSWER.And now someone else has done it too.And why have i been given two thumbs down when i spent over an hour writing this all down and breaking down the moves for you.I was genuinely trying to help by answering the question but now i wish i hadn't bothered and i had kept my solution to myself.And it is my own solution by the way, look on as many sites as you like,you wont find this solution, this one is 100% my own.

Answer 2

Step 1 - Build a 2x2x2 corner
Step 2 - Expand to 2x2x3
Step 3 - Twist the edges --- 2, 4 or 6 bad edges
Step 4 - Finish 2 layers --- Step 4b tricks
Step 5 - Position the corners --- Complete Step 5+6 index
Step 6 - Twist the corners --- Complete Step 6+7 index
Step 7 - Position the edges


haha.. watch beauty and the geek.. the geek guy solved the rubix cube in like 10 seconds tops.. with his eyes closed

Answer 3

Haven't done one in a long time, but from what I remember you need to figure out the specific sequence of twists to get a block in the right place.

Wish I could be more specific but thats all there really is to a rubix cube, finding the correct sequence.

Answer 4

I`m waiting for the correct answer. Then we all will know.

Answer 5

Take a look here.

http://en.wikibooks.org/wiki/How_to_solve_the_Rubik%27s_Cube

Answer 6

http://www.wrongway.org/cube/solve.html

Just input the colours as they are on your cube and this will tell you how to get it back, yes its cheating but who cares?

Answer 7

Dont mess it up in the first place!!!!

Answer 8

peel the stickers off and stick them back on the right way simple ;)

Answer 9

i have solved tens of rubix but each time by tring i dont know if there is a mathmatical way ....

Answer 10

just kep fiddling with it