muratic acid, wire brush, rubber gloves and safety glasses is what you need. Dilute the acid according to the instructions, spray on mixture and wire brush the area, rinse well with water and your done. your local hardware or building centre will have all of the above items as well as instructions.
2006-11-12 05:54:40
·
answer #1
·
answered by Anonymous
·
1⤊
0⤋
With countless sparkling water and a puzzling brush , this might take the soot off. circulate away to dry then in case you have a brick an identical shade as your hearth , then with heat water soak the brick and rub againts the bricks interior the hearth . Your hearth will arise looking tremendously much as good through fact the day you got it . puzzling artwork yet very well worth the time spent on doing it
2016-11-23 16:54:10
·
answer #2
·
answered by ? 4
·
0⤊
0⤋
Greased lightning or simple green degreasers work well you can find these products at home depot. fill a quart size trigger sprayer with 1/3 degreaser, 1/3 vinegar 1/3 hot water. works immediatly and non toxic. Spray area to be cleaned then aggitate with a scrub brush, back in bussiness.
2006-11-12 00:35:50
·
answer #3
·
answered by ? 2
·
0⤊
0⤋
spray with oven cleaner - scrub with a brush and rinse well -
i used this before on the brick around the fireplace doors
it cleaned up nice == just lay down a tarp or newspaper before you spray to protect carpet for flooring
2006-11-12 01:18:37
·
answer #4
·
answered by lake living 5
·
0⤊
0⤋
Muratic Acid, be sure to wear gloves and eye protection.
2006-11-11 23:49:44
·
answer #5
·
answered by judy_derr38565 6
·
0⤊
0⤋
I hate to say I'm cheap...but I use soap and water and a stiff brush...it does the trick
2006-11-12 02:38:00
·
answer #6
·
answered by hummingbird 2
·
0⤊
0⤋
Use Swiffer
2006-11-11 23:46:55
·
answer #7
·
answered by . 2
·
0⤊
0⤋
What about CILLIT BANG . it is a wonderful cleaner.
2006-11-12 03:15:49
·
answer #8
·
answered by Mags 3
·
0⤊
0⤋