English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Ive painted four cars in my life.The problem ive had is three out of the four came out basically flat.I mixed the hardner reducer and paint correctly.I also prepared all three the same.I want to paint my sons car but I want it to come out glossy and not crappy.Any suggestions?Please help if you can.

2006-11-11 14:12:21 · 5 answers · asked by porkchophaynes0206 3 in Cars & Transportation Maintenance & Repairs

5 answers

It sounds to me like you are having a 'blush" problem which could be caused by the temperature in the booth or area that you are painting in may be too cool or you could be having Reducer issues. Sometimes uses a Fast reducer as compared to a slow or medium reducer will make the paint flash off quicker & retain it's gloss. Check with the paint supplier or manufacturer for the proper mix ratios because you may be putting on the paint too dry. I generally take a piece of body steel & do a quick test panel to make sure the mixture & the gun are set properly. It only takes a few miutes but saves a lot of time & aggravation.

2006-11-11 17:43:27 · answer #1 · answered by Diablo 3 · 0 0

your getting bloom or moisture in the paint work , body shops use heat lights to dry the paint so as not to get this happening
if you paint in the heat of summer its not a problem ,but you have to watch out for high humidity and cold wet weather
If its humid or cold hire a set of heat lamps they are not to expensive . the other thing is to wet sand with a fine grade paper after color and before clearing the final coat a good cut and polish at the end will leave you looking at that handsome painter in the reflection in that deep paint work.

2006-11-11 20:39:26 · answer #2 · answered by slick 4 · 0 0

It's your thinner. Get some advice from your local paint supplier on which thinner you should be using at your location. Make sure he understands if you do or do not have a heated paint booth, downdraft exhaust system, etc. When all else fails, a handfull of 800 grit sandpaper, a little water and a polisher will make it look like glass.

2006-11-11 14:20:30 · answer #3 · answered by Anonymous · 0 0

i in my view be attentive to somebody who did that. No, it wasn't me. when I lived in Florida in the eighty's I had a neighbor who painted his automobile with Latex paint. He did it the wonderful way and sanded to bare metallic, wiped sparkling and primed, then painted with Gloss Latex. for specific, it nevertheless recognized like a painted wall. He have been given what he wanted. To be observed. Even the law enforcement officers observed his automobile, and, observed the site visitors violation he made. He have been given 14 tickets in one month and had his license suspended.

2016-10-17 04:17:52 · answer #4 · answered by ? 4 · 0 0

Are you using clear coat. Do you buff it out after painting

2006-11-11 14:20:21 · answer #5 · answered by Anonymous · 0 0

fedest.com, questions and answers