2006-11-10 14:29:28 · 8 answers · asked by eddie c 2 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
its a 2000 S10 and when it stalled it was also overheating and when it cooled it would not start, gas is flowing but no spark.
2006-11-10 14:46:25 · update #1
Ck ign control module ,ck crank sensor
2006-11-11 02:18:51 · answer #1 · answered by deltech 4 · 0⤊ 0⤋
Sounds like the crank sensor quit working - Or if it's an older S10 with a distributor, it could be the spark module which is connected to the distributor. Either way, good luck!
2006-11-10 22:40:53 · answer #2 · answered by Danno 2 · 1⤊ 0⤋
Head for the library and get a chiltons or motors manual on your vehicle. Copy the pages on electrical items such as the coil, distributor, the electronic ignition or whatever it is called on that model. Get the troubleshooting section copied too while you are there.
Use it to determine as much as you can and just maybe you can figure it out yourself.
Best of luck....
2006-11-10 22:45:38 · answer #3 · answered by Johnny B Goode 3 · 0⤊ 0⤋
It's a 2000 so has obd 2. Get a scanner and see if you have trouble codes.
2006-11-10 23:04:50 · answer #4 · answered by tronary 7 · 1⤊ 0⤋
Check the power lead to the distributor for power. It may have broken due to vibration.
2006-11-11 13:40:46 · answer #5 · answered by ? 4 · 0⤊ 0⤋
Sounds like a crank sensor. Check the alternator and the starter.
2006-11-10 22:52:46 · answer #6 · answered by Mike 2 · 0⤊ 2⤋
check for jumped timing.
2006-11-11 06:09:29 · answer #7 · answered by midnighttoker 3 · 0⤊ 0⤋
ignition module
2006-11-11 01:45:49 · answer #8 · answered by michael_stewart32 4 · 1⤊ 0⤋