I also disabled the motherboard which has the built-in graphic card and now I cannot do anything ....How can I enable the motherboard even though there is no graphic on the monitor?
2006-11-10 06:16:45 · 7 answers · asked by ohoma 1 in Computers & Internet ➔ Hardware ➔ Other - Hardware
In my experience the best way to get the graphics card enabled, without seeing the BIOS options on screen is by resetting your CMOS, by shorting it. Please refer to your manufacturers manual to see how is is done.
This might also been known as
Resetting your BIOS
Setting Motherboard to Default
If you do not wish to do this take it to a PC repair shop.
2006-11-10 06:33:42 · answer #1 · answered by Shuggy 3 · 0⤊ 0⤋
there are some opportunities the following. a million) examine that potential grant fan is operating once you attempt to instruct on laptop. If ti isn't operating you want to change the potential grant 2) examine that your video card is operating. If not replace 3) examine connection cable between laptop and computer screen for perfect placement. 4) see in case you may listen the problematical force spin as a lot as % once you boot laptop. that is conceivable that your problematical force has seized in which case you'll favor to change problematical force. 5) if all the above are operating examine inner cables for perfect fitment. observe that laptop must be switched off formerly attempting this step. If this does not fix the issue take your laptop for your community laptop tech for him to look at.
2016-11-29 00:18:53 · answer #2 · answered by ? 4 · 0⤊ 0⤋
gotta shut it done and take the card out, most motherboards dont need to be disabled to see a new video card,
your mother board should see the ATI card is gone and load up the old port,
I have not ever had a ATI card problem, they always work
2006-11-10 06:20:03 · answer #3 · answered by rich2481 7 · 0⤊ 0⤋
You sdisabled your motherboard?? If you actually DID that, yuo should never know how to access the BIOS. Go ahead, flag me, but your screwed if ou really did something like that.
2006-11-10 06:55:53 · answer #4 · answered by Sean Brackeen 3 · 0⤊ 1⤋
poll the bios battery off aftrer you have turned off and unplugged the pc you will only need about 30 sec then pu it back in and plug in the machine and restart
2006-11-10 06:21:16 · answer #5 · answered by bsmith13421 6 · 0⤊ 0⤋
restart in safe mode, change display settings, then reboot
2006-11-10 06:26:24 · answer #6 · answered by Johnson W 2 · 0⤊ 0⤋
you shouldn't've played with it then. hmm? hm
2006-11-10 06:27:11 · answer #7 · answered by garry.mullen 6 · 0⤊ 1⤋