My radiators are not working properly I think they have bubbles in them. The top half is fine, while the bottom is cold. How do I release it? Its a Danfloss raditator. Expert help please!
2006-11-09 20:22:46 · 3 answers · asked by bikbokkop 2 in Home & Garden ➔ Maintenance & Repairs
you need a radiator key, then you need to "bleed" them when they're hot. have something for the (often grimy) water to spurt into, then just open the valve with the key and wait until it's not air but water coming out.
2006-11-09 20:28:10 · answer #1 · answered by mookvey 3 · 1⤊ 0⤋
Once again, the radiator problem and air. You have to bleed the radiator.
You'll need, a pail, a key or other tool that will open the top butterfly flange than open the radiator while the pump is on. It will spit water, hold the pail under the butterfly until the water is out and it starts spitting steam or air, give it a second or two than close the butterfly. Do this to all your radiators, you may have to bleed the tank also.
2006-11-10 06:07:37 · answer #2 · answered by cowboydoc 7 · 0⤊ 0⤋
Leave the Bubbles alone they didny do anything to you.
2006-11-10 17:56:32 · answer #3 · answered by Specialist Ed :Þ 3 · 0⤊ 0⤋