English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

7 answers

Heat them up. You can use a flame from a lighter or a torch or you could place them in a warm oven. Only warm! Try 175-200 degrees F. This won't harm the brass but will melt the wax. Be sure to place them in some sort of baking dish to catch the wax or your next question will be how to get wax out of oven.

2006-11-09 18:09:52 · answer #1 · answered by Ibeeware 3 · 0 0

if true antiques, never scrub or scrape.
Two things - 1) put your candlestick into a freezer and allow it to truly freeze (leave it in 24 hours), take it out, and immediately give the wax a poke - chances are it will dislodge within moments - the brass will change size due to heat absorption and expansion faster than the wax, so the wax will be dislodged.
tarry old wax or wax with other residues - try immersing the candlestick in hot or boiling water, in a pot (or sink, depending on size). some wax may move. Now send it into the freezer. Any trapped water will expand dramatically, and free up areas from the wax. NOTE never use this method with glass or mixed brass/metal and glass candlesticks, as you will surely ruin them. And never clean the tarnish from brass candlesticks, for therin lies the charm and value of such a thing. PS to poke at things, use something such as a popsicle stick, not your finger,or metal objects. Just works better, overall.

2006-11-09 18:30:37 · answer #2 · answered by BrettO 2 · 0 0

Brass Candlesticks

2017-01-02 11:20:39 · answer #3 · answered by geake 4 · 0 0

Brass Candle Holders

2016-11-14 19:37:32 · answer #4 · answered by ? 3 · 0 0

One of the best ways to remove candle wax that has dripped onto the surfaces is to scrape most of it n then melt the rest with a hair dryer.
Wipe up the wax as it melts with an absorbent towel or cloth.

Or try this

STEP 1: Add 1/8 inch of water to the bottom of a votive candleholder before you insert the candle. This will make wax removal easier later on.

STEP 2: Place washable candleholders and votives in a plastic tub of warm water to soak. The wax will loosen and can be easily removed. Stubborn pieces of wax can be pried away from the candleholder surface with a spoon or butter knife.

STEP 3: Place nonwashable candleholders in the freezer. This will cause the candle wax to become very brittle and easy to remove. Excess wax can be scraped off with a butter knife or spoon.

STEP 4: Use a commercial product, such as Goo Gone, to remove the excess candle wax. Apply the liquid to the wax with a clean cloth and allow to sit for a minute or two. Scrape off wax with a spoon or butter knife. Clean area with water and mild soap.

STEP 5: Cover the spoon or knife in a thin, soft cloth before you use either to scrape off wax. This will protect delicate finishes from being scratched.

Warnings:
Do not soak candleholders in your sink.
Wax can clog your drains.

2006-11-09 18:32:33 · answer #5 · answered by sugar candy 6 · 0 0

Melt it off.

2006-11-10 03:07:15 · answer #6 · answered by sue m 2 · 0 0

fedest.com, questions and answers