2006-11-08 13:11:10 · 8 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
IT depends on the size of the bolts..
here is a good site to look at
http://www.raskcycle.com/techtip/webdoc14.html
2006-11-08 13:15:09 · answer #1 · answered by Jonny B 5 · 0⤊ 0⤋
If your sway bar components are "aftermarket" you must send this question to the manufacturer. If you are playing with stock Toyota components then the dealership "MIGHT" and I specify might help you out. (Read too much liability) When all else fails buy a Chiltons manual for your make and model year auto. Chilton has been around for years and they produce a good product.
2006-11-08 21:21:04 · answer #2 · answered by Two dimes and a Nickel 5 · 0⤊ 0⤋
Yes, you always need to torque down important nuts, and bolts. I am not sure to what torque, find the manual, go to a parts store (pepboys, or autozone) and borrow a manual, or just ask them, their always happy to help
2006-11-08 21:45:16 · answer #3 · answered by Adam F 1 · 0⤊ 0⤋
You probably should to do it right, I never do but thats me, call the toyota garage and ask them what the foot lbs. are for the sway bar link, I really don't know.
2006-11-08 21:16:47 · answer #4 · answered by mister ss 7 · 0⤊ 0⤋
yes you should,if they are 3/8 or 10mm then torque to 23 ft lbs
2006-11-08 21:17:37 · answer #5 · answered by doug b 6 · 0⤊ 0⤋
If it's the type with rubber grommets, there is no torque spec.
Usualy, its' four full turrns past touching.
Or something like that.
2006-11-08 21:17:17 · answer #6 · answered by Mr. KnowItAll 7 · 0⤊ 0⤋
i own a repair shop,and i never torque them i just run them down good and tight and they,ll be ok that way,as long as they go down good and tight there not going to back off,,good luck i hope this help,s.
2006-11-08 21:16:26 · answer #7 · answered by dodge man 7 · 1⤊ 0⤋
just crank them suckas down good and tight
2006-11-08 21:30:07 · answer #8 · answered by whatup 2 · 0⤊ 0⤋