The firs time .The temp. was 98 and i stoped to check the fluid It did not regester so i added fluid. When i got home i changed fluid and filter. The fluid look slightly burnd the filter looked good. The fluid level was over full by the amount i added. The last time the temp was 93. I checked the fluid and got a low regester so i let it set for a while and it has been fine since. The fluid level is fine. ?????
2006-11-08 07:43:49 · 4 answers · asked by revtobadblack 6 in Cars & Transportation ➔ Maintenance & Repairs
I agree with the tranny flush.
when you just drain one using the plug, you only
get out like 20% of the total amount in your
torque converter...
2006-11-08 07:52:07 · answer #1 · answered by deltaxray7 4 · 0⤊ 0⤋
Spring for some overpriced Mobil 1 tranny fluid and do a good flush. It will last the life of the vehicle and hold up a lot better than regular fluid. Air temp shouldn't matter. The fluid is cooled by circulating through the radiator which should always be at the same temperature.
2006-11-08 11:13:49 · answer #2 · answered by Nomadd 7 · 0⤊ 0⤋
Check your vacuum lines. Does it have an automatic? There are vacuum lines going from the Engine to the tranny.
2006-11-08 07:46:09 · answer #3 · answered by Icefire 3 · 0⤊ 1⤋
I believe the tranny needs to be flushed
2006-11-08 07:46:58 · answer #4 · answered by nbr660 6 · 0⤊ 0⤋