2006-11-08 04:53:27 · 4 answers · asked by tony mit der donnerundblitzen 1 in Cars & Transportation ➔ Maintenance & Repairs
It sounds like you need to have the carb cleaned. I would get someone to do it, they have the right cleaners and there are a lot of little parts in there.
2006-11-08 04:58:04 · answer #1 · answered by Thomas S 6 · 0⤊ 0⤋
Get a carb rebuild kit for about $20, three large cans of Gumout, a sixpack of beer and spend the evening overhauling the carb.
2006-11-08 19:43:27 · answer #2 · answered by Nomadd 7 · 0⤊ 0⤋
this is common,the plastic looking floats soak up fuel over time and need to be replaced.the brass floats sometimes crack and fill up.i have drained and soldered these successfully.do a carb kit and it should run like a top.remember to change the engine oil as it may be fuel contaminated
2006-11-08 13:00:29 · answer #3 · answered by doug b 6 · 1⤊ 0⤋
Yea, the float needle valve is sticking, or the float is saturated. Rebuild the carb.
2006-11-08 13:03:45 · answer #4 · answered by Anonymous · 0⤊ 0⤋