2006-11-08 04:33:37 · 5 answers · asked by Jazzwal 1 in Computers & Internet ➔ Hardware ➔ Desktops
i am a hardware tech.
it is very simple.just follow these steps.
i am assuming this is a second hard drive.
1)connect it to the computer.
2)turn it on.
3)enter the bios.
4)enable the disk
5)restart
6)boot to windows as usual
7)you should be able to see the new hard drive in my computer
8)format it.
9)you are done.
if you need further assistence..
write to me at:
aanonymouus@yahoo.com
2006-11-08 04:44:50 · answer #1 · answered by The Saint 2 · 0⤊ 0⤋
warning : abode residing house windows abode XP SP1 somewhat enables SATApersistent as much as 120GB. i've got have been given self concept your BIOS is desperate CDROM enabled somewhat for booting. do no longer press F6 on the comparable time as setting up. Press F6 is for RAID or SCSI drivers which those hard disk drive appropriate to RAID or SCSI PCI card. Use abode residing house windows XP professional SP2 for SATApersistent with extra suitable effective than a hundred twenty GB. XP would desire to waiting to tell u that yourpersistent is new and ask u to create NTFS partition via ability of determination of rapid format or the classic way. something persist with the coaching to end your setting up.
2016-10-21 11:49:01 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Stick it in, XP will recognize it
2006-11-08 04:34:44 · answer #3 · answered by gare 5 · 0⤊ 0⤋
use partition magic to format the drive so it recognizes it as NTFS
2006-11-08 04:35:19 · answer #4 · answered by abelp068 2 · 0⤊ 0⤋
GET IT ON DISC
2006-11-08 04:35:08 · answer #5 · answered by Juleette 6 · 0⤊ 0⤋