2006-11-08 02:54:36 · 11 answers · asked by darlin_jj 1 in Cars & Transportation ➔ Maintenance & Repairs
50 psi or look on the tire sidewalls
2006-11-08 02:56:48 · answer #1 · answered by ? 7 · 1⤊ 1⤋
How much air your tires require is ALWAYS printed in the tire sidewall. Just as is the tire size, look for very small print close to the tire size and it should tell you "max psi ??lbs" then depending on how often you run "fully loaded weight limits" you may want to adjust the psi in your tires to compensate for the heavier loads. Always remember to check your tire pressure before driving with a full load, or at least once a month. More often if you drive the vehicle loaded alot. Good Luck! :)
2006-11-08 03:04:23 · answer #2 · answered by little red net 1 · 1⤊ 1⤋
Well this all pending on the Load Range of tire u have! I'm pretty sure u have either a LRE or LRD tire on them! So i'd say go about 55-65psi in them, that'll be good and in Dodge and Ford they generally do Go 60psi front and 80psi rears, in case of 3/4 ton! hope that helps!
Also check your side pannel, it has an index that shows that amount of psi u should add for ur OE tires! and just guestimate from there!
2006-11-08 02:59:27 · answer #3 · answered by Anonymous · 1⤊ 1⤋
I know you have alot of people telling you to look on the tire, but they are wrong !!!
The rating on the tire tells you the maximum inflation pressure rating of the tire. You must go by the sticker located inside the drivers door as you open it. If the rating is not there, look at your owners manual.
This is the correct tire pressure for your vehicle.
2006-11-08 07:22:33 · answer #4 · answered by jarhed 5 · 1⤊ 0⤋
ok first check the sidewall of the tire to check what the max load of the tire is at that psi. Setting your air pressure at the max load when not using that much load on the tires is dangerous. hints why they tell you the max to set it at not what you are supposed to set it at. Dont excede the max on the sidewall. I would set it at 65-70psi. I'm a Crew Chief at Discount Tire Co./America's Tire Co. Trust Me I know what I am talking about
2006-11-08 03:34:53 · answer #5 · answered by Steve R 2 · 0⤊ 1⤋
at least 35 pounds ,i own a repair shop,and i run mine around 35 this way it don't ride hard ,and handles good ,,but look on the side of the tire ,it tells you on there what it should be run at and always go by that ,,good luck,i hope this help,s.
2006-11-08 03:06:13 · answer #6 · answered by dodge man 7 · 0⤊ 1⤋
it will say on the tire all tires have diffrent preasure ratings make sure they are all the same or vehacle may shake or pull
2006-11-08 03:00:43 · answer #7 · answered by Ray M 2 · 2⤊ 1⤋
look on the sticker on the door.
look in your owners manual.
2006-11-08 03:11:51 · answer #8 · answered by supahtforyou 4 · 1⤊ 0⤋
yeah check your vacuum lines
2016-05-21 21:55:34 · answer #9 · answered by Anonymous · 0⤊ 0⤋
it will tell you on the tire.
2006-11-08 03:03:10 · answer #10 · answered by Dr. Head 2 · 1⤊ 1⤋