How could I copy a CD onto another one if I only have one CD tray?

Question

-I'm using NERO 6 but it seems like it can't copy tw CDs unless you have two trays...any advices?

Answer 1

Rip and then burn using windows media player, or some other software

Answer 2

When you want to copy an entire disc you just need to follow the step by step instructions. You must read carefully the menus and instructions on the entire page. When you insert the disc you want to copy, Nero will retrieve all the data from that disc. When that step is completed you need to take out that disc. Then you will be prompted to insert an empty disc. Then only will it start burning. You don't need two CD trays. The single tray is used to both retrieve the data as well as burn the data. What matters is that your pc has a CD burner hardware. And be careful to read and follow the step by step instructions. Don't rush.. .Hope this helps.

Answer 3

Please go thru the entire process once in full in the interactive mode. With one tray, it prompts u to remove the source cd, after it has prepared temporary image file, and load the blank or the target cd. After u follow the instructions, it start formatting and copy the image file on to the blank cd.

Answer 4

When you click on copy, what these others failed to explain to you,, what its going to do ,, AS LONG AS You have the hard drive space,, it will save the image of the disc on your hard drive,, after you put in blank disc, it will send copy from hard drive image to Nero for the burn process, no worries,, just put it in and go with the flow, and try it,, it will suggest to save the image to a folder that does not exist, let it make a folder to save it to, and then you can remove it when your done with burn process

Answer 5

I have nero as well, and have accomplished this due to the fact that my nero will make an image and then burn that image to a disk.

Answer 6

Take the files from one and cut n paste them into a file folder on the comp insert the new disk and add the files from the folder to the to be burned list and burn data, I use burn for free its very simple depending upon what your doing.
-NmD!

Answer 7

Press "Copy CD"

Answer 8

you can copy from one of the cd to the computer and then from the computer to the blank cd

Answer 9

ummm no, it should work fine.
when you copy, nero will ask you to insert the data disk. after it finishes buffering the image, it will ask you to insert a burn disk. click ok and voila!

Answer 10

let nero copy image first, then replace the master cd with slave and then click 'BURN'.