Thermic Fluid Working?

Answer 1

Thermic Fluid System work on closed loop principle and is the best solution for any heating need in process industry. In Thermic Fluid System, a synthetic / mineral based thermic fluid is circulated in the system using high temperature resistant pump and heat is one through combustion of fuel in main coils of the Thermic Fluid Heater. the heat produced is then utilized by thermic fluid and then utilised in the process. The returning fluid coming out of the process is taken to uniquely designed expansion *** deaeration tank, where all system is made non pressurized. The fluid from expansion tank goes back to the pump again and the process is repeated. temperatures up to 300 Deg. C can be achieved using Thermic Fluid Systems.

Answer 2

Thermic fluid are used for heat conductivity and heat transfer form one area to another . It is Economical then Steam and even performance is much better then any old heat transfer media , the best part is this it has a very long life and cost saving in operating . the best thermic fluid I know is synthetic one added with silicon additives . this thermic fluid overcome the problem of carbon stick ness in pile line ..more detail you can get at
www.hitechsolution.co.in

Answer 3

Depends on various parameters.