what is the torque sequence on the intake of a 1996 oldsmobile achieva with a 3100 engine
2006-11-07 03:23:01 · 4 answers · asked by Pat 1 in Cars & Transportation ➔ Maintenance & Repairs
Depending on which engine you have, you can locate the tightening sequence here:
http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/0e/54/4b/0900823d800e544b.jsp
2006-11-07 03:37:10 · answer #1 · answered by hsueh010 7 · 0⤊ 0⤋
If it is a newer 3.1, engine code M or J:
Lower intake (make sure to apply blue loc-tite to bolts):
4 vertical bolts to 65 in/lbs in a cross pattern, then retorque to 115 ft/lbs (go over each bolt at least 4 times to allow the gasket to compress).
4 diagonal bolts to 15 ft/lbs
Valve cover:
tighten in a cross pattern to 80 in/lbs
Upper intake:
torque from center in cross pattern to 16 ft/lbs
2006-11-07 11:47:28 · answer #2 · answered by ? 6 · 0⤊ 0⤋
Hmm I would imagine it would be on the owners manual in the glove compartment or maybe on the back of the radio or maybe try googling it.
2016-05-22 07:30:04 · answer #3 · answered by Anonymous · 0⤊ 0⤋
http://www.oldsmobilerepair.com This may help,not sure.
2006-11-07 03:25:20 · answer #4 · answered by Anonymous · 0⤊ 0⤋