Problem ,please do help me with ideas..?

Question

if i put on my computer ,my monitor dont display instead it shows that 'signal cable disconnected'.but the cpu is respond but only monitor dont show any thing for more..what can be the problem ,virus or dies of signal cable ,motherboard or..thanks for ur ideas

Answer 1

check to see if the cable is loose.
(on the monitor and the computer both ends)

check to see if your video card is pluged into your motherboard
(turn off the computer and ground yourself before touching it)

try a differnt monitor if those two things don't work, if the second monitor doesn't work then you have a bad video card.

Answer 2

The best way is to download Ccleaner here http://bitly.com/UrALrK

Or you can go on Windows operating system locate the command prompt and go there to do the following:
Create a Recovery file of system and date it today.

Then begin by;
delete the 'Temp' folders..they have hidden subfolders so you need to set the attributes in order to bypass this. For each subfolder delete all cookies and rubbish left behnd after install-uninstalled programs. Do a 'dir' command to check your progress. Make sure the 'Temp' file is empty.

goto c:\windows\prefetch and delete everything in there..no exceptions

goto c:\windows folder and delete all the '$' files that have been installed by updates. They can all be succesfully deleted and just take up disk space.

Locate the Internet Temporary Files..Check to see how high the saving level is..some have it set at 30 days..but that stores faaaar tooo much data..though it slows down the system overal. Keep this to a minimum..suggest 2 or 5 at most.

Delete all 'cookies' all those you don't need.

Locate the windows directory and go through the folders you know and those you don't need. Check this once a week at least. Some programs will install under XP as NT and older systems where there is no check of systems weight.

Check to see that system files have not changed since last booting. Things like .ini files or .bat are important items.


Check for 'Hidden Directories' all over the disk...do this at the command prompt:

dir *.* /ah wil show these hidden directories

Check the 'dir' command for all parameters

Answer 3

If it's like that then there are three problems you must check. First, is the socket for the monitor on the motherboard. Second, is anywhere on the cable of the monitor, could be the inner wires, or the plug itself. Third, the monitor has a problem within. There are no viruses involved or faulty software it is just physically damaged on either. Better check out these problems.

Answer 4

make sure all the cables are connected on the monitor correct and firmly in the pc, if thats ok you could have a faulty monitor

Answer 5

This is the problem due to the bad connection between ur CPU and monitor. Try to replug the cable connecting ur CPU and Monitor.

Answer 6

Your pigeon english doesn't help matters...

check that your monitor is correctly attached to your pc... if you run off a graphics card (not the onboard one) check that it is firmly in place... also try changing it... i had a display problem and it turned out my graphics card had knackered.

Answer 7

try the monitor on another computer ....if it is working then ...if all the conections appear ok ...check the setting of the video card ..as they can become unseated ..have you recently made any changes to your computer .....some programmes can knock out the settings or drivers for the video card ...

Answer 8

prob a cable issue. check the pins to make sure they arnt bent .

Answer 9

Tweak with the cable - that's the problem






http://www.skillipedia.com