My water cooler has been acting funny recently. Hot water works no problem. But the cold water side is the problem. When I push the spigot, sometimes water won't come out normally. Sometimes it drips when I let it go. Sometimes it works fine. Before it works fine though, water will come out real slow for a few seconds. It's pretty frustrating especially when I'm thirsty. I removed the spigot cap to get to the line directly, and water doesn't gush out. So its definitely NOT the spigot gasket, spring, or operation.
I shaked and hit the machine. Resetted it. No go. Also the air vent for the tank isn't blocked.
Whats going on?
2006-11-06 14:47:59 · 4 answers · asked by jccjr1982 2 in Home & Garden ➔ Maintenance & Repairs
Is the water cold when it comes out? If it is real cold comming out your water maybe freezing up on you. The thermostat maybe sticking and causing the water to drop below freezing. I would check the setting on thermostat and try raising it to see if you hear it click and leave it at a higher setting. If this helps your water maybe warmer than you like, meaning the thermostat probably is the problem and needs replacing. You can try unplugging it for couple hours and see if you get water.
2006-11-06 15:11:09 · answer #1 · answered by Techman 2 · 2⤊ 1⤋
Culligan Water Cooler Troubleshooting
2016-11-06 22:22:32 · answer #2 · answered by ? 4 · 0⤊ 0⤋
Check the water tube. There is most likely something in the tube blocking proper flow.
2006-11-06 15:02:54 · answer #3 · answered by Anonymous · 0⤊ 1⤋
sounds like a dead mouse is in it
2006-11-06 14:52:48 · answer #4 · answered by T C 6 · 1⤊ 4⤋