Diy platform bed plans?

Question

Has anyone seen free plans on how to make a platform bed?

Answer 1

Make it out of a sheet of 1" OSB or plywood. Cut it to the size-- you want. 2" X 2 " legs on all corners plus two short brace-legs midway of each side and that should make it plenty strong. I would measure a twin-size bed and make it that size so that a good mattress will fit it properly.

Answer 2

1

Answer 3

Really you don't need any DIY plans. I made three beds for the family - a twin bed, two single beds. If you can afford cut-to- size sawn timber the work load is easirer. First you will have to decide on the exact sizes, make a frame, set in the cross timber which makes the sleeping area or lay a sheet of plywwood cut to size to fit the frame you have made.If you want a bedhead, this is the time to add it on, so with the tail piece. Or if you don't need the bedhead, the task is even simpler. Just firt on the legs firmly in place and you have your bed sans the mattress. In my case I crafted the twin bed so that it housed a linen cupboard under with pull-out drawers. For the childred I had the drawers set in such a way that it provided a suitable housing to hold their shoes, polishing materials, etc.,

Answer 4

If you are a beginner or have done some woodworking you will find these plans easy-to-follow as the instructions are very clearly written https://tr.im/ManualOfWoodworking

The woodworking plans are straightforward so they are not complicated at all. Even if you are a total newcomer to woodworking you will simply be able to master all the techniques that are needed and the woodworking skills very quickly by following the concise and clear instructions.

Another thing which is so great about these woodworking plans is that there have been some videos included and there are some to guide you in how to build benches home furniture dog houses bird feeders sheds and much much more.

Answer 5

If you are planning to start on your woodworking project, this isn't something you should use, it's something that you would be insane not to. Go here https://tr.im/ManualOfWoodworking
Truth is, I've been a carpenter for almost 36 years, and I haven't found anything like this for less than 10's of thousands of dollars.

Answer 6

Here is a good picture of a platform bed. Visit your local furniture store and take some measurements of a bed that interests you. Crawl under the bed and see how it is assembled.

THEN, tackle your project. Good luck.

Answer 7

I saw a plat form bed for sale at Wal-mart, and it had the plan break down on the out side of the box, why not go there and take a look. They are not complex, so it wouldn't be much to record them in the store.

Answer 8

Teds Woodworking #1 Woodworking Resource - http://Woodworking.NaturallySaver.com

Answer 9

Check out trading spaces web site, or hgtv.com. It is fairly easy to build a frame and top it with a piece of mdf.

Answer 10

the best trading software http://tradingsolution.info
i have attended a lot of seminars, read counless books on forex trading and it all cost me thousands of dollars. the worst thing was i blew up my first account. after that i opened another account and the same thing happened again. i started to wonder why i couldn,t make any money in forex trading. at first i thought i knew everything about trading. finally i found that the main problem i have was i did not have the right mental in trading. as we know that psychology has great impact on our trading result. apart from psychology issue, there is another problem that we have to address. they are money management, market analysis, and entry/exit rules. to me money management is important in trading. i opened another account and start to trade profitably after i learnt from my past mistake. i don't trade emotionally anymore.
if you are serious about trading you need to address your weakness and try to fix it. no forex guru can make you Professional trader unless you want to learn from your mistake.