Unfortunately, a computer is not yet as consistently reliable as a refrigerator or a toaster. A computer can and will misbehave on occasion. I've heard all the laments. My computer just crashed. My screen is frozen. My system is running too slow. No matter what you call it, there is never a good time for a computer to act improperly. Unfortunately, this is a normal part of computing in today's world. You may or may not know what has caused the problem. But in the end, it is the way that you handle the problem that will make all the difference.
Look for the obvious
First be patient. If your computer fails to respond to your keystrokes, it may have a problem. However, the computer could also be busy performing some other function, which you may not be aware of. For instance, your computer may seem to stop when automatically saving a file or when printing something in the background. So give it a minute or two. If it still doesn't respond, look for an obvious problem first. It may sound simplistic, but sometimes the problem is easily found. If your screen is blank, check the power cable. Make sure that the power to the house has not gone off. Also, many newer computers have a suspend feature that blanks out the screen in order to save electricity. Press a few keys to see if the computer will come back to life on its own.
If your screen is still on, but your mouse clicks and keystrokes don't elicit any response, try a couple of simple checks first. Make sure that everything is still connected. Perhaps your dog just ran out from under your desk and loosened the keyboard or mouse cable. In many programs, the Escape key, which is marked Esc, will take you back one step. So always try hitting the Escape key a few times before you concede that the computer is truly locked up. If you still get no response and the connections check out okay, it's time to go on to the next step.
The magic key combination
The next step is the magic key combination. Find the keys marked Ctrl, Alt and Del. Press these three keys all at once. This key combination is a remnant of the DOS days of computing. In DOS, pressing these three keys caused the computer to restart or "warm" boot. The Windows operating system uses these three keys in a similar, but slightly different way. If you are using Windows 95, Windows 98, or Windows Me, when you hit the magic key combination you will be presented with a Close Programs box that shows a list of the programs that are currently running. If Windows has found the offending program, it will list the words "not responding" next to the program's name. You can then highlight the name of the errant program, press End Task and return to your computing. (You will lose any data in that program that you have not yet saved.) You also have the option of pressing Ctrl+Alt+Del again to restart your computer. This should be used only after you have tried the other options unsuccessfully.
Windows XP handles the Ctrl+Alt_Del key combination slightly different. Pressing these keys in Windows XP will bring up a "Windows Task Manager" screen. (In the Professional version of XP, you need to choose "Task Manager".) Click on the Applications tab to see the list of currently running programs as described in the last paragraph. Most average users will not have to be concerned with the information on the other tabs on this screen. Luckily, Windows XP doesn't freeze as much as previous versions of Windows.
Occasionally, even the Close Program Box and/or Windows Task Manager Box freezes or is inoperable. If this happens, your last resort is to restart the computer. If your system has a restart button, you can press it to restart the computer. If you don't have a reset button, turn off the computer. Wait several minutes, and then turn it on again. It is important to wait a few minutes to let the hard drive and other components come to a complete stop before restarting the system. Unfortunately, turning the computer off in this manner will result in losing the changes you made to any documents that you were working on since you last saved them.
Losing data
It seems that most computer users learn this lesson the hard way. You must save your work often just in case something goes wrong. You will find that some programs have an AutoSave feature. For instance, if you were working in Word when you were forced to restart your computer, after you turn your computer back on you may see that Word has restarted your document with the label "Recovered". If this happens, you should express your gratitude and immediately name and save the rescued document. While the AutoSave feature can come in handy, don't rely on it. It is always best to save each document manually as often as you can.
Viruses and Spyware
Viruses and Spyware can cause your system to misbehave. They can also cause your computer to freeze. There are several viruses that throw the computer into a loop where it continually tries to restart. If you encounter freezing problems or other unusual behavior, be sure to scan your computer for viruses and spyware. To learn more about computer viruses, read What is a Computer Virus? More information on spyware and how to remove it can be found in my Scary Spyware article. If your computer freezes more than a few times a day and you have confirmed that it does not have a virus and have removed any spyware, your computer might have a wayward program or a hardware complication that needs troubleshooting. If, however, your computer freezes only on occasion, don't worry about it. Although computer freezes have been lessened with the introduction of Windows XP, occasional computer glitches still can happen.
Hope this helps!!!!!!!!!!!
2006-11-05 06:55:59
·
answer #1
·
answered by Secret Service But I Got My Own SK 1
·
1⤊
0⤋
you will get a sort of solutions for this one because of the fact it relatively is a great sort of issues. i'm going to throw in my guess. seek for an older application that's no longer functioning properly with your working equipment. this is, a WIn ninety 8 application which you're utilising with XP. Or application superior 2002 or until now. sturdy probability that this is a driving force yet no longer hassle-free to tell which one. seek for clues... including specific application classes that don't act good, or a document reference including "sparkling Sweep replaced into no longer able to load" as an occasion of a application reference. diverse anti-virus classes will conflict, surprisingly if one among them is Norton. diverse disk burning classes might conflict. perchance you're working newer application classes on an older equipment. in case you get a blue demonstrate screen crash, inspect the backside of the demonstrate screen for a document reference. it is going to very practically have a .sys extension. Left click My pc, and good clickchronic C. % residences. Run an blunders verify. it is going to ensue once you reboot. you could insert the OS disk and do a fix. confirm you have set the BIOS to boot from the CD-ROM until now it boots from the no longer hassle-free disk. (in spite of the undeniable fact that, that may not help regardless of if this is different application conflicting with the working equipment.) sturdy success
2016-11-27 20:28:20
·
answer #2
·
answered by ? 4
·
0⤊
0⤋
this is either because ur page file size is too big or because u have tons of trojans and spywares on your system
1.rightclick on the taskbar select taskmanager and see the performance tab.
2. your pagefile size should be less than 180 if you have installed sp2.
3. if not download this software: Tuneup utilities 2006 and defrag ur registry it does wonders
4.Run a couple of antispyware softwares like spybot
2006-11-05 06:58:09
·
answer #3
·
answered by Uzair(Stormshadow) 2
·
0⤊
0⤋