I have all the components eg. graphics card, hard drive etc.
Im not an engineer, and although I have studied the motherboard manual and done what I can, theres still wires that dont go anywhere.
My case didnt come with any instructions, where can I find out how its supposed to be wired up?
2006-11-04 21:07:25 · 3 answers · asked by bruvvamoff 5 in Computers & Internet ➔ Hardware ➔ Other - Hardware
I usually trace the wires to see where they lead to, such as the activity light/hard drive, power light, reset switch..etc. then find the pins on the motherboard that corresponds, plug them in. If it don't work, try turning them around. Sometimes the little black harness' that group the wires may have too many spaces to plug in, in which case I would remove the wires from the hard jackets and plug them in individually. There is a little clip that you pry out on the black connector that releases the wire & brass round end.
2006-11-04 21:19:24 · answer #1 · answered by PappySmurfer 3 · 0⤊ 0⤋
There are wires inside a PC that are extras shouldyou want to add hard drives or cd-rom drives in the future.
2006-11-04 21:16:07 · answer #2 · answered by niq_mau 2 · 0⤊ 0⤋
if u connect all tthe wires & the pc is working good u can leave that wires untill u can use it .
2006-11-04 21:13:31 · answer #3 · answered by dolitik 2 · 1⤊ 0⤋