Not only is it a separate slave drive or just a partition on the same disk but, have any of the letters for your other drives changed? We kinda need this info in order to be able to give you the PROPER instructions to fix your problem.
However, by reading your question, carefully, I'm wondering if your cd drive was being called "D" drive. If it that's the case and it continues not to read cds you put in it, you may have to take your puter into the shop and have the connections on the hardware checked as well as the reader on the cd-rom drive itself.
2006-11-04 12:27:03
·
answer #1
·
answered by x_southernbelle 7
·
0⤊
1⤋
Try seeing if its in the device manager, if not try searching for nerw hardware and see if it finds it. check your bios and see if it recognizes it there, try a different ide cable. forget you ever had a d drive and move on with your life. these and suggestions and many more can be found by searching your inner mind.
2006-11-04 20:30:24
·
answer #2
·
answered by Helping Since 1969 6
·
0⤊
2⤋
reinstall or update the drivers
(from cd that came with drive or manufacturers website)
or
reinstall drive & reboot
2006-11-05 18:02:43
·
answer #3
·
answered by Denise 2
·
2⤊
1⤋
Use file recovery software such as PC Inspector File recovery
2006-11-04 20:21:35
·
answer #4
·
answered by ponniyincelvan 3
·
0⤊
2⤋
Try un-installing the drive & then re-installing it
Windows will pick it up again...
Hope this helps
2006-11-04 20:21:27
·
answer #5
·
answered by Anonymous
·
2⤊
1⤋
Maybe you just have to wait or try several times before ti will show up on your list.
2006-11-04 21:19:25
·
answer #6
·
answered by ☺collia☺ PaRtY LiKe tInKeRbElL 3
·
0⤊
2⤋
OK well is it a slave drive or a partition on the disc?
2006-11-04 20:20:40
·
answer #7
·
answered by Greek 3
·
1⤊
1⤋
Don't use a Microsoft operating system
2006-11-04 20:21:39
·
answer #8
·
answered by dojjey2002 1
·
0⤊
2⤋