English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I somehow ran over wet paint that someone spilled on the onramp to a freeway and it kicked up onto my cars paintjob. How do I get it off? Besides the obvious.

2006-11-03 18:03:14 · 7 answers · asked by bchgoer03 1 in Cars & Transportation Maintenance & Repairs

7 answers

Dear God, please dont "do a lot of scrubbing" or use paint thinner on your cars finish. Go to your local hardware store and get a bottle of Goo Gone, it is very gentle but designed specifically for removing tar, paint and guck from surfaces that you would rather not destroy in the process.

2006-11-03 19:00:59 · answer #1 · answered by Paul S 4 · 0 0

you need to renowned that until eventually now you paint you need to thoroughtly degrease the area this is to be painted. Your hands leave a tiny quantity of grease everywhere they touch, this grease is what's understand as "fingerprints". in case you attempt portray over so little as a unmarried fingerprint, in that very spot the paint will react and not stick, you will then see a tiny bubble and your paint interest would be ruined. this is why while sanding or coping with the serfice to be sprayed you need to apply surgical gloves after which you nevertheless ought to thoroughly degrease the full floor to be sprayed, this could nicely be a step you may't avert doing. Now which you realize all this, you may think of the mess you're inflicting while making use of paint stripper. fortunately, paint stripper is water solubile so via jet washing the full sorry mess away there is an threat you would be waiting to get maximum of it off, regardless of if in case you're saying that there are complicated to attain places, then in those places the stripper isn't liable to do its interest o.k. and so which you would be left with paint this is 0.5 rotten/corroded. sturdy success portray over that! people who say that sand blasting isn't for use do basically no longer understand what they're speaking approximately. you do no longer ought to sand blast interior your sales area besides, in case you're saying which you would be able to not often see in specific places, then why might you prefer to strip that paint? on the main basically degrease as much as you may and then spray over it, for this reason why this is often greater suitable to apply the comparable colour that replaced into in there initially. There'd be a lot to be suggested approximately sand blasting and bead blasting softer surfaces yet this is meant to be an common answer. desire I helped RE: Why do maximum physique shops sand paint on motor vehicle particularly of chemical strip? maximum suitable kind of chemical stripper? the different question: i ought to strip the hood of a motor vehicle the two interior and outdoors. interior floor is quite convoluted, and sanding does no longer artwork because of the fact there is little flat floor. So i choose a chemical stripper, yet which form and kind: paste, liquid? airplane stripper? Kleen Strip? Jasco? Mostenbockers? Does it must be a stripper meant for automobiles? can i take advantage of a stripper for timber or better half and youngsters?

2016-10-15 08:56:13 · answer #2 · answered by Anonymous · 0 0

very carefully. the paint may be oil or water based. water based may come off with soap and water and lots of scrubbing. for oil based, use mineral spirits or paint thinner. if you use thinner make sure it wont damage your car paint by testing it where it can't be seen such as under the hood on the edge of the inner fender which is painted. if it doesn't harm the car paint you can use a cloth with just a dab of thinner to see if the other paint comes off easily. be sure you keep wiping the surface you're cleaning to keep the paint from smearing to much.

2006-11-03 18:55:50 · answer #3 · answered by de bossy one 6 · 0 0

Have you tried bug and tar remover?Also try some stuff called Graffity Remover,make sure you read it to see if it's save for that type of paint job.Also some Goo Gone works.

2006-11-03 18:10:29 · answer #4 · answered by dragonsaver005 4 · 0 1

you could wait for it to dry then try and chip it off, use your finger nail or something similar so you dont scratch the cars paint.

2006-11-03 18:06:10 · answer #5 · answered by Don A 4 · 0 1

use reducer or laquorthinner.use it very ver lightly. im a car builder johnson_johnj@yahoo.comy

2006-11-03 19:05:28 · answer #6 · answered by johnson_johnj 1 · 0 0

DENATURED ALCOHOL!

2006-11-03 20:22:45 · answer #7 · answered by B 3 · 0 0

fedest.com, questions and answers