2006-11-03 01:31:36 · 12 answers · asked by Matilda H 1 in Home & Garden ➔ Maintenance & Repairs
Hold the tap, while underneath you tighten it up.
2006-11-04 22:59:47 · answer #1 · answered by T - C - B 3 · 0⤊ 0⤋
Check the rubber in between the metals it might be worn out. Might need a new one or a new tap altogether. Try tightening first.
2006-11-03 09:42:43 · answer #2 · answered by DolphinLami 4 · 1⤊ 0⤋
If you mean it's loose in the mounting hole, the nut underneath needs tightening; to get to this you need a 'Basin wrench' - loads of diyers have these, but not very expensive to buy.
2006-11-03 09:44:35 · answer #3 · answered by Anonymous · 0⤊ 0⤋
pop the H&C cap covers with a thin object like a small screwdriver or pen knife. This will get you to a screw that holds the handle down, probably phillips head, tighten clockwise, thank you1
2006-11-03 09:43:31 · answer #4 · answered by Anonymous · 1⤊ 0⤋
Tighten the back nut on underside of sink, mind you don't loosen the water connection nut under it, when you do so.
2006-11-05 17:25:22 · answer #5 · answered by Anonymous · 0⤊ 0⤋
tighten it underneath yr sink and on the top
2006-11-03 12:00:11 · answer #6 · answered by robertboozychic 4 · 0⤊ 0⤋
Tighten It.
2006-11-03 09:34:47 · answer #7 · answered by bob r 4 · 1⤊ 0⤋
What on earth is Dolphin talking about?
2006-11-05 05:32:08 · answer #8 · answered by Anonymous · 0⤊ 0⤋
probably
cheers
2006-11-03 11:49:26 · answer #9 · answered by Lee A 2 · 0⤊ 0⤋
oh
2006-11-03 09:35:44 · answer #10 · answered by emma m 4 · 0⤊ 0⤋