2006-11-02 17:00:01 · 4 answers · asked by tim k 1 in Cars & Transportation ➔ Maintenance & Repairs
different brands different contries probably not. but you center one rim lying flat on the ground on top of other look down through top rim through bottom to see if same. also you can measure center of each rim then measure distance from center of bolt to center of next bolt and so on all four. do that with both if the same they will work.
2006-11-02 17:16:33 · answer #1 · answered by terry a 2 · 0⤊ 0⤋
yes, they are both 4x100 bolt pattern so the pattern is correct.
The only other thing stopping it from fitting is the center bore of the rim. If it's aftermarket rims, they will be bored bigger than normal and you can if you want to, purchase hub centric rings to take up the gap. If they are stock wheels, the center bore might be different.
2006-11-02 17:42:19 · answer #2 · answered by Mike C 4 · 0⤊ 0⤋
should. i would say 90% of all 4 lugs are the same in diamater
2006-11-02 17:04:11 · answer #3 · answered by Anonymous · 0⤊ 0⤋
On 4 hole just measure from center of hole directly across to center of opposite hole
http://www.discountedwheelwarehouse.com/Vehicle_Bolt_Pattern_Reference.cfm
2006-11-02 17:21:45 · answer #4 · answered by tronary 7 · 0⤊ 0⤋